• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

1996 AC plumbing?

ehall

NAXJA Member
NAXJA Member
I have a 91 but my HVAC system is bits and pieces of custom parts. I currently have it drained for a heater core swap. I was looking at ways to simplify it a bit and came across this page in the parts catalog. full size


1996_HVAC_Plumbing.sized.png


Is that an accurate diagram for 96? Earlier models all had service valves on the compressor that forced the lines to come out of the compressor sideways. I already checked the interchange, and the compressor, expansion valve and condenser are all the same part numbers, so fittings should be the same.

And are the high and low service ports on the compressor lines (looks like caps)?

Thanks
 
That is how my '96 is setup. Caps on the two lines behind the compressor.

Do you need any actual pics?
 
Back
Top