• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Help!! Transfer case and transmission are sitting too high

Everything about the height of the xfer case look normal to me including the clocking.

Check for the point of contact. Get under there and look at the exhaust to verify it is not making contact with the cross member or the floor in the area of the xfer case.

With 5.5" of lift, the drive shafts will have a steeper down slope. That is a different can of worms altogether.

I'm doing the SYE and cv driveshaft.
 
Back
Top