• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Fuel Return on Renix

Tacedaddy

NAXJA Forum User
Someone please tell me that the line (circled in yellow) is supposed to be attached to the two top lines on the gas tank? (circled in red)

379801_10150412183862957_556537956_8504128_838025125_n.jpg


just went wheeling and im having a hard start issue..
thanks guys
 
Can't tell much from the pic but...

The two rubber lines coming out from the top of the tank are vent lines. They come together to a T and then connect to a hard line that runs along the driver's side framerail up to the EVAP canister against the firewall underneath the heater core outlets.

The big rubber line coming out of the pump assembly (the circle plate with the lockring around it) is the feed line, and the smaller diameter one is the return line.

Hope that clears it up for ya.
 
Back
Top