• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

What dose as stock dana 44 look like

Jeep 250

NAXJA Forum User
I was at the local u-pull it and think I found an dana 44 in a 94 XJ. Is this possable? It is kinda round but octagon. Looks bigger around than the 35. Is their some way that I can ckeck the vin id? The last time I bought an compleat frount end it cost my $150. Is this worth looking into?
Dennis
 
Here is my xj 44
DSCF0120.jpg
to the best of my knowledge they only put 44's in 87-89, Very unlikely to see one in a 94 unless it was swapped in...
 
It will most likely have 3.55 gears. Are you sure you have 3.07 gears? What year is yours and what drive train?
Brett
 
Since it's from a 94, it is a 27-spline 8.25, which may not be worth it. The 29-spline 8.25 is more desirable.
 
You can find the 29-spline in late-96 and later XJs. Glad the pics helped; and thanks for the plug rob.
 
Back
Top