• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

No turn signals after removing dash.

cbwymore

NAXJA Forum User
Location
Rhododendron, OR
2000 XJ 4.0L auto

I removed my dash to replace heater core and A/C evap core, got it all back together but when I took it for a test ride the turn signals don't work and the flasher relay stays on (buzzes). The hazards don't work and the indicator lights do not come on either. Headlight, markers and brake lights all work.

I replaced the flasher relay and it stays on. Any assistance on where to start looking or a diagram on the turn signal system would be greatly appreciated.
 
One might suppose that you did not fully seat a wire harness connector, re-check your work. Failure of the turn signal switch assembly is somewhat common, but logically if the signal worked before, and don't work now, either you forgot to plug in something, or possibly something like a wire or two got damaged.
 
Back
Top