I nave new re3.5" coil springs, longer fixed rough country lower control arms, and a re adjustable track bar (it is centered) all newly installed. My passenger side coil is rubbing pretty bad on the bumpstop mount. I have noticed the slots for adjustment in the frame side lower control arm mount and by looking at the slots the passenger side sits all the way back in that slot while the driver side is about 1/2-3/4 of the way forward in the slot. Could this be the possible cause and if so can I just loosen the bolts of on the back side of the bracket and the lower control arm and adjust it out to correct the rubbing?
This is also still present after having a alignment done 2 shops have told me they don't know whats going with it.
This is also still present after having a alignment done 2 shops have told me they don't know whats going with it.