- Location
- Salem, OR
Very nice. Need to get myself a mj
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
My Mild MJ
- Thread starter cody4359
- Start date
cody4359
NAXJA Forum User
- Location
- tacoma, wa
Sent from my SM-G900V using Tapatalk
cody4359
NAXJA Forum User
- Location
- tacoma, wa
Sent from my SM-G900V using Tapatalk
cody4359
NAXJA Forum User
- Location
- tacoma, wa
Sent from my SM-G900V using Tapatalk
cody4359
NAXJA Forum User
- Location
- tacoma, wa
Sent from my SM-G900V using Tapatalk
moparmansfield
NAXJA Forum User
- Location
- Portland
Damm that's a nice place to explore. I was just up in Seattle and it really had me thinking about moving up there.
cody4359
NAXJA Forum User
- Location
- tacoma, wa
This was out by rosyln, eastern wa. I'm working in Seattle now and despise it lol. 2 hrs to get home to tacoma even tho I'm working 12s. I've been finding some nice new areas
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
cody4359
NAXJA Forum User
- Location
- tacoma, wa
Coming back from hunting in October
Dirtbound offroad majave diy kit. I wanted to make it a hidden winch setup but decided that was more.work than I wanted to do, and being able to wimch front or back isn't a bad thing.
Sent from my SM-G900V using Tapatalk
Dirtbound offroad majave diy kit. I wanted to make it a hidden winch setup but decided that was more.work than I wanted to do, and being able to wimch front or back isn't a bad thing.
Sent from my SM-G900V using Tapatalk
RynoMJ
NAXJA Forum User
- Location
- Long Island
Very nice, I like the dirtbound bumpers.
cody4359
NAXJA Forum User
- Location
- tacoma, wa
cody4359
NAXJA Forum User
- Location
- tacoma, wa
Stripped and repainted the bumpers, time will tell how durable this stuff is. I do like the finish tho, front bumper wasn't done curing
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
cody4359
NAXJA Forum User
- Location
- tacoma, wa
Sent from my SM-G900V using Tapatalk
- Location
- REDLANDS, CA. (SoCal)
Your rear bumper; home brew or ?
- Location
- Thornton, CO
Looks JCR'ish, but the tabs are different.
https://www.jcroffroad.com/mm5/graphics/00000001/DIY-MJ-R_WJ_WB_7.JPG
https://www.jcroffroad.com/mm5/graphics/00000001/DIY-MJ-R_WJ_WB_7.JPG
- Location
- REDLANDS, CA. (SoCal)
It does. I think the angle the photo was taken from is messing with the eyes.
cody4359
NAXJA Forum User
- Location
- tacoma, wa
It's a jcr diy, I didn't like how the tabs came so I radiused them. Guess I'm knit picky because when I did the dirtbound bumper I didn't like how the tabs were 1/2" so I mimicked them out of 1"
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
- Location
- REDLANDS, CA. (SoCal)
I like it. Especially the way it wraps around at the ends. It's enough without being too much.
I'm definitely going to have to take a closer look at them. It looks like they'll get me 2/3 or more of the way for what I have in mind. I want to incorporate my existing class 3 hitch into the bumper support. I want to maintain my full towing capacity.
I'm definitely going to have to take a closer look at them. It looks like they'll get me 2/3 or more of the way for what I have in mind. I want to incorporate my existing class 3 hitch into the bumper support. I want to maintain my full towing capacity.
cody4359
NAXJA Forum User
- Location
- tacoma, wa
Been a bit busy, I started pull g out all the fatmat, that like a rookie I covered every inch in. it 99% off, I've got some diy lizzard skin for sound and heat but started looking into it more. I've also bought a few sound deadner showdown CLD tiles and I'm looking at insulation for more sound and heat barrier. at that point I found a 99 xj with a knocking motor for $700 went a bought it. Got it home washed it and thought it was to pretty and complete to tear apart for the wiring harness, so I happened to find another 99 the same day for $300. bright that pos home, stripped ot completely and just sent it to the wrecker. I now have a spare aw4 and np231j to rebuild down the road after I dissect the harness and make the mj a quality built rig.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
- Location
- Salem, OR
Why did you switch from fatmat to lizard skin
cody4359
NAXJA Forum User
- Location
- tacoma, wa
fatmat sucks in my opnion, and when I put it on I covered every square inch like a rookie and it's not designed for what I wanted. I'm battling horrible heat on the trail or in traffic without ac. one culperiate is the muffler half under the cab, and gets the floor to 165-170 withing 45 mins of idling. I was going to do lizzard skin bit have returned it and have some microbaloons for sou d and ceramic for heat. I've be looking into it more and bought some sound deadner showdown CLD tile and I still am searching for a hear barrier and a sou d barrier. now that u have a new harness to put in, I'm going to cover the firewall in something as well as the oem foam/rubber.basically I want the heep to be quiet and cool in the interior. and the fatmat is asphalt based, got hot and melted/oozed in areas. those type of products are meant for resonance control for the panel, not heat or sound from the tires like I had assumed.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Similar threads
