mhead
NAXJA Forum User
- Location
- Encinitas, CA
I've a '92 XJ 4.0 with A/C and 190K miles. My experience with XJ's is that the I-6 is a very reliable motor, but the spinning things (water pump, power steering pump, fan clutch, idler pully, alternator) require replacement from time to time. I've replaced nearly all at one timer or other.
My idler pully was the most recent to go. It occurs to me that there is another bearing that I should swap out, this being the bearing upon which the fan/fan clutch spins. It appears that this bearing is located (pressed into?) within the aluminum bracket that holds my A/C pump.
What is the correct name for this bearing so I can do a searh on ?
Anyone have experience replacing it? Is it hard? Know of any instructions for doing this job?
Thanks!
My idler pully was the most recent to go. It occurs to me that there is another bearing that I should swap out, this being the bearing upon which the fan/fan clutch spins. It appears that this bearing is located (pressed into?) within the aluminum bracket that holds my A/C pump.
What is the correct name for this bearing so I can do a searh on ?
Anyone have experience replacing it? Is it hard? Know of any instructions for doing this job?
Thanks!