• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

What does this burnt plug go to.

Intellect

NAXJA Forum User
Location
Tampa Florida
95 4.0 4wd cherokee , my 4wd light/abs light/check engine light stopped working recently and i smelt smoke... Im fixingthis either way, but curious what its for. I went to cut it to splice and i heard a buzz like a door buzzer lol (forgot to disconnect battery which im doing now)
7cbcc929b5ba8bf6ad69240650c5bbc2.jpg
34cee65bf5271d7c5c25f11857eaa6d0.jpg
28b241a9e795837c71c7e0a60fb0c724.jpg
e53e4d2caa24a11a101d06f9a140b888.jpg
16137cd46e3a44bf70646d2a6d38cde6.jpg


Sent from my Moto G (5S) Plus using Tapatalk
 
The connector is the headlamp delay module, C233.

#1 White/blck and White/Orage are fused ignition switch output.
#2 Tan/black is headlamp switch output
#3 Black wires are ground
#4 Gray/Orange is fused B+ 12 volts.

You got the right fuses in there? Shorted headlight maybe?
 
Back
Top