• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Sneak peeks at my D44 buildup...

ThePhantum

NAXJA Forum User
Location
Richmond, VA
It's been the bain of my existence for the last few weeks...but it's starting to come together. I'm waiting for the custom built truss, then I can route all my brakelines and finally get this thing in.

They'll be a couple of writeups on this as the axleshafts (including bearing and seals, of course) were replaced and a disc brake conversion was done. Plus there's the truss still to come as well as the skid plate...but here's a few pics to tide y'all over....

sneak01.jpg


sneak02.jpg


sneak03.jpg


:cool:
 
Nice..............but seen it many times before. So many are running them, save the time on the write up and spend it in the garage working on it. :)
 
LOL! No writeups will be done until it's bolted in and been wheeled twice! I just won't have the time until then. I realize that on this board it's been done quite a few times (this is where I gathered 99% of the info during the planning stages), but there are lots of boards out there that a writeup like this would help someone else out...and that's why I'll do it. :)

Steve
 
Back
Top