White Jeep Build

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Nov 8, 2015

• #21

New chain and changed the input shaft on my terra 4:1 to 23 spline

Here is the 5 gear planetary

Had to line these little guys back up

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Nov 9, 2015

• #22

So this happened today...

https://vimeo.com/145103697

 

Sean112280

NAXJA Forum User

Location

Killeen, TX

• Nov 9, 2015

• #23

What the heck?

 

kenny811

NAXJA Forum User

Location

Damascus, OR

• Nov 10, 2015

• #24

There are better ways to remove a Cherokee windshield

 

Jbh97009

NAXJA Forum User

Location

Damascus, Oregon

• Nov 10, 2015

• #25

RedJeep2.0 said:

So I have been making a big deal about wanting to use my A/C while wheeling in the summer so I installed two 7" electric push fans and that cooler is my power steering.

The idea was the electric fans would help the stock electric fan and the clutch fan pulls enough CFM by its self.

Click to expand...

I really like that! I may try that on my brothers jeep when I start it!
If that cooler is your ps, where is your trans cooler?

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Nov 10, 2015

• #26

Jbh97009 said:

I really like that! I may try that on my brothers jeep when I start it!
If that cooler is your ps, where is your trans cooler?

Click to expand...

That is my PS cooler
My 97 doesn't have a tow package, so no auxiliary factory cooler.

I will be installing a trans cooler and temp gauge

I have an idea what I am going to do about the cooler

I'll show you when I get it

 

Last edited: Nov 11, 2015

Jbh97009

NAXJA Forum User

Location

Damascus, Oregon

• Nov 11, 2015

• #27

RedJeep2.0 said:

I'll show you when I get it

Click to expand...

Looking forward to it

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Nov 15, 2015

• #28

Black jeep is gone

Getting the mid stiff on

 

R

R.DesJardin

NAXJA Forum User

Location

Clarkston, WA

• Nov 17, 2015

• #29

Did you get a picture of Scott picking his nose????? :laugh2:

 

NW-ZJ-SCOTT

TEXAS-JT-SCOTT

NAXJA Member

Location

NE Texas

• Nov 17, 2015

• #30

:badpc:

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Dec 7, 2015

• #31

Installed a high volume oil pump today

Had a little issue with the pickup tube being wrong ...

2 inches was to much and my stock one was gross so after finding the correct one got it all done

New pump
Rear main
Pan gasket

She's ready for axles

 

M

mtbxj87

NAXJA Forum User

Location

Bend, OR

• Dec 7, 2015

• #32

Did you have to clearance the pan to fit around the Pump?

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Dec 7, 2015

• #33

mtbxj87 said:

Did you have to clearance the pan to fit around the Pump?

Click to expand...

No the pump was the same size as the stock one.

The pickup i ended up getting was the same as the stock one to. So everything went back up with no issues.

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Dec 14, 2015

• #34

Did the drill mod to the stock power steering pump.

Installed a PSC under drive pulley 2401

New shorter belt needed Gates K060938

Got the front axle in and jeep sitting on the coils

Everything is lose and I am going to stitch weld the track bar and crossmember after I snug everything up .

 

Last edited: Dec 27, 2015

L

Los Lobos

NAXJA Forum User

Location

Wilsonville, OR

• Dec 19, 2015

• #35

It's taking shape!

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Dec 26, 2015

• #36

Made some progress

Got more parts on order

Going to get the rear in today

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Dec 27, 2015

• #37

Got a lot done today thanks to Scott for giving the big push to make the snow run tomorrow

Couldn't find my shock bolts, had these laying around and the square fits in the bar pin so it won't spin.

Few pics stolen from Scott


2" welds on the crossmember

Cutting the fenders

Drivelines

New CB mount it had the holes so I filled them, this thing is solid!

Five 1/4" bolts with nuts and the stock fender bolt

Later I added a ground to it



Getting ready to pull it out

Back in after a 5min drive

Made it to Gresham for dinner

And she was still outside waited by for me when I got out

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Dec 28, 2015

• #38

Now that the jeep is on the road I have a lot of little things I want to get done.

CB installed

Took it out in the snow with a few guys

It did well, the steering loosened up so I still have some work to do. But other then that I was super happy

Got back to Scott's and put a few things on

Terra hand throttle
Manuel high idle and for those long pushes in the snow.

Got my "bro bar" on

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Dec 30, 2015

• #39

Installed at ZJ gas tank

Scott had one laying around and its 23 gallons


Scott puts 23 gallons in his ZJ from empty and I can only fit 17
So this should be a 6 gallon upgrade

Online says my XJ has a 20 gal tank but I have never been able to get that close.

ZJ one is the cleaner one

Got it all in and was able to save a full 5gal out of my stock tank and put it in the XJ for now. Gave me just under and 1/8th of a tank.

Installed (under driver side)

Under passenger side

Passenger side from rear

It's close but there is a 1/4 inch from the tank to the shield and from the shield to the exhaust

 

RedJeep2.0

NAXJA Forum User

NAXJA Member

Location

Vancouver, WA

• Dec 30, 2015

• #40

My 97 XJ with the ZJ gas tank

My stock 01 XJ

But you can see they hang down the same

 

Last edited: Dec 30, 2015