jeeperguy21
NAXJA Forum User
- Location
- Syracuse, UT
I am about to dive into the process of rotating the axle C's to get a better caster angle. Prior to making any adjustments, I measured the current angle on both the driver and passenger sides and am getting different measurements. The passenger side shows 1.1 degrees and the driver side shows 2.3 degrees, shown in the links below:
https://www.dropbox.com/s/0ldsdayjsd4mr0j/2017-10-18%2020.27.50.jpg?dl=0
https://www.dropbox.com/s/3cyuq4oxwpb1mcx/2017-10-18%2020.27.04.jpg?dl=0
Couple of questions:
1) Am I measuring this correctly?
2) Should I try adjusting the control arms to have the caster match on both sides before I start grinding away?
https://www.dropbox.com/s/0ldsdayjsd4mr0j/2017-10-18%2020.27.50.jpg?dl=0
https://www.dropbox.com/s/3cyuq4oxwpb1mcx/2017-10-18%2020.27.04.jpg?dl=0
Couple of questions:
1) Am I measuring this correctly?
2) Should I try adjusting the control arms to have the caster match on both sides before I start grinding away?