PDA

View Full Version : carnage award?

rredalty
June 23rd, 2009, 10:53
What are we going to do about this? I have plenty of parts I can use to build something. BTW, thanks Brianho13...
PacificEd
June 23rd, 2009, 11:53
Wait for Mark to break so we can build a new one. :scottm:
High2by
June 23rd, 2009, 12:55
Wait for Mark to break so we can build a new one. :scottm:

Who says I'm gonna break. The old saying is "You don't HAVE to break, just pull cable"

I can practice that. What, I can!! :eyes:
PacificEd
June 23rd, 2009, 13:00
I know your current track record. It's just a matter of time.
Ghost
June 23rd, 2009, 14:28
In the tradition of the crawl I will make one if it is needed out of the broken parts of the lucky recipent. The whole thing about that award is that it was started with the broken stub shaft one year.
~Spanky~
June 24th, 2009, 14:43
I am quite convinced that the irony and ability to create carnage on a mass scale is directly equivalent to the manifestation of raw nerve of the operator and the uncanny, yet agile XJ’s poise to summit the most unsurpassable obstacle. Once achieved by said operator, namely me; I shall endeavor to persevere until the aforesaid award is placed in a location of prominence within my domicile.
Philosophically speaking as one that has been know for the amount of fecal matter derived from an uncastrated adult male of the domestic cattle species, that I can on rare occasion verbalize.
In other words: I can win it!
Ghost
June 24th, 2009, 14:52
Umm, you steal some of that stuff you collected last month and smoke it?
High2by
June 24th, 2009, 15:16
I'm tellin ya, this is one award I don't want. It's awful hard to win and too expensive to maintain.
Ghost
June 24th, 2009, 15:53
I nominate Lennie. He has a recipie for disaster. 36" SS with D30 front and 8.25 rear.
~Spanky~
June 24th, 2009, 17:38
Umm, you steal some of that stuff you collected last month and smoke it?
I was just ramblin' for the sake of some BS.Hasta
BRIANHO13
June 24th, 2009, 19:01
I think Glen should give away his Winebag.:wave:
Ghost
June 26th, 2009, 20:28
I think Glen should give away his Winebag.:wave:
I think you need to bring your arse down here.
~Spanky~
June 26th, 2009, 20:30
http://www.animatedgif.net/vehicles/jeep1_e0.gif

CAN'T WE ALL JUST GET A LONG!
:conceited
:D
Ghost
June 26th, 2009, 20:58
Who's not getting along?
~Spanky~
June 27th, 2009, 04:48
Who's not getting along?
:twak::cheers::twak:
:rolleyes:
256offroad
July 5th, 2009, 16:59
Who says I'm gonna break. The old saying is "You don't HAVE to break, just pull cable"

I can practice that. What, I can!! :eyes:
wow the irony in this....
MELKORsXJ
July 5th, 2009, 18:14
wow the irony in this....

:roflmao::roflmao::roflmao::roflmao::roflmao:

...i never heard "pull cable". it was more like, "bump it" "give it more throttle"





...SNAP!

way to go Mark!!!
stumpXJ
July 5th, 2009, 18:43
Mark pulled cable on Still Hill, so he covered all the bases. ;D
High2by
July 5th, 2009, 21:41
:roflmao::roflmao::roflmao::roflmao::roflmao:

...i never heard "pull cable". it was more like, "bump it" "give it more throttle"





...SNAP!

way to go Mark!!!


Oh shut up!!!

I swear, I didn't want it!!!!
Ghost
July 5th, 2009, 21:45
Post made in nontech! :conceited
PacificEd
July 7th, 2009, 19:18
So Mark, what are you going to weld to it?
High2by
July 7th, 2009, 19:25
I've got my front 30 Alloy USA short side going on it and I've got my rear Superior 44 Alloy piece of shaft plus I have Dave's short side 30 shaft that the u-joint made fine work of. So, I will add two 30 short side shafts plus a piece of a 44 shaft.

Good fun!!!!!
Ghost
July 7th, 2009, 19:49
I've got my front 30 Alloy USA short side going on it and I've got my rear Superior 44 Alloy piece of shaft plus I have Dave's short side 30 shaft that the u-joint made fine work of. So, I will add two 30 short side shafts plus a piece of a 44 shaft.

Good fun!!!!!
Nice!
~Spanky~
July 7th, 2009, 20:05
Ok, after some thought...(yes it did hurt)...the SEC has hired James Earl Jones to make an announcement

Carnage News Network (http://newmail.monsterserve.com/keepout/tv/cnn[1].wav)

Hasta
High2by
July 8th, 2009, 06:04
Ok, after some thought...(yes it did hurt)...the SEC has hired James Earl Jones to make an announcement

Carnage News Network (http://newmail.monsterserve.com/keepout/tv/cnn[1].wav)

Hasta




:roflmao::roflmao::roflmao:
MELKORsXJ
July 9th, 2009, 21:23
heard you had quite a bit of carnage after tearing into the axles mark...

do tell!
High2by
July 10th, 2009, 06:33
Why yes I did. :eek:

When the rear 44 broke, it more like shattered into a bunch of big flakes. :fuse:The bearing on the carrier looks busted into several pieces and it looks like the carrier itself has "egged" out and now I can't even get the stupid carrier out. :gee::gee:

Rest assured though, it will be fixed and hopefully ready shortly for another romp though the woods.:looney:

It's all good!!!!
stumpXJ
July 11th, 2009, 06:28
Wow... that sucks Mark. D60 time? LOL....

~James
High2by
July 12th, 2009, 12:19
Well, maybe a 9".
Ghost
July 12th, 2009, 13:02
Well, maybe a 9". I would reconsider. I know you are running alloys but are they the bigger shafts with more splines?
256offroad
July 12th, 2009, 19:55
come on now ghost... you arent going to break a 9" with 5.13s spooled and 35 splined shafts! on 35s!

http://i140.photobucket.com/albums/r38/256offroad/IM000510.jpg

http://i140.photobucket.com/albums/r38/256offroad/IM000515.jpg
Ghost
July 12th, 2009, 21:10
come on now ghost... you arent going to break a 9" with 5.13s spooled and 35 splined shafts! on 35s!

http://i140.photobucket.com/albums/r38/256offroad/IM000510.jpg

http://i140.photobucket.com/albums/r38/256offroad/IM000515.jpg

Well it can happen. No one said anything about spools and 35 spline shafts.
High2by
July 13th, 2009, 06:24
The alloys I'm running are standard splines. I will probably end up with a spool in the rear though.

Looks like the 9" is pretty beefy!! What is the spline count on the 9"? Wouldn't it be stronger than the 44?
Ghost
July 13th, 2009, 06:59
The alloys I'm running are standard splines. I will probably end up with a spool in the rear though.

Looks like the 9" is pretty beefy!! What is the spline count on the 9"? Wouldn't it be stronger than the 44?

Nope not by much and the pinion is way lower. I think the 9" has 31 spline shafts. You should have 30 IIRC. No a whole lot of difference for the loss in pinion height. IMHO you need to run a 33 spline shaft of a shaved D60 with 35 splines if you are breaking a D44 with 35's, or was it 32,s?
High2by
July 13th, 2009, 08:21
I'll probably go with 33 spline shafts in the 44 with a spool.

Yea, 32's that's the size!!
Ghost
July 13th, 2009, 09:14
I'll probably go with 33 spline shafts in the 44 with a spool.

Yea, 32's that's the size!!
In all honesty I would try that b4 going to a 9" or a D60. Unless you get a tru hi 9. But that is some serious $$$$$$. I'd be intrested in the shaft size of the chromo D44's versus the 9" shaft though. You can build the 9" to 35 splines but you still loose 2" of pinion height.
256offroad
July 14th, 2009, 14:45
yeah that is the biggest problem with the 9" is the low pinion.

IMHO i would upgrade shafts and spool it.
MELKORsXJ
July 15th, 2009, 21:59
IMHO i would upgrade shafts and spool it.

...he already has alloys!
and has broken them on each of the last trips i've wheeled with him :gee:
BRIANHO13
July 16th, 2009, 05:04
you guys should quit pussy footing around. 14 bolt.
Ghost
July 16th, 2009, 07:05
you guys should quit pussy footing around. 14 bolt.
Yea my boat does need an anchor!
BRIANHO13
July 16th, 2009, 08:40
Yea my boat does need an anchor!


or bigger tires.:D
Ghost
July 16th, 2009, 10:54
or bigger tires.:D
Nope, 42 SXII's are good. They need to flex more but I think that will come with some more wheelin!