Peter's87XJ
NAXJA Forum User
- Location
- St. Cloud, MN
Hey guys I plan on making a new dash with a gauge setup having a tach and speedometer both being 4", and then eight other gauges being 2 1/16"
these are the other eight gauges i plan on incorporating
Fuel
clock
Air pressure
Oil pressure
Oil temp
Tranny Temp
Water temp
volt
Since i already have the oil temp and tranny temp from the same series i thought i would keep it all the same. I'm using the vision line of gauges by VDO
http://www.egauges.com/vdo_bld.asp?Series=Vision
The questions i have is if anyone could post pics of their homebrew dashes, and if anyone knew the proper ohms required for the gauges, especially oil pressure and fuel. thanks for the help...
-Pete
these are the other eight gauges i plan on incorporating
Fuel
clock
Air pressure
Oil pressure
Oil temp
Tranny Temp
Water temp
volt
Since i already have the oil temp and tranny temp from the same series i thought i would keep it all the same. I'm using the vision line of gauges by VDO
http://www.egauges.com/vdo_bld.asp?Series=Vision
The questions i have is if anyone could post pics of their homebrew dashes, and if anyone knew the proper ohms required for the gauges, especially oil pressure and fuel. thanks for the help...
-Pete
