PDA

View Full Version : shocks, coils, LCAs

asp
March 22nd, 2009, 20:13
RS5000's... ran them at 2" and 3.5"ish. ride just like they did the day i got them (also used) $30 for the pair

http://i12.photobucket.com/albums/a215/tonythetiger734/0319092029.jpg

4" Tomken coils. they rode nice, and are pretty flexy, powdercoating is flaking off... sat a little above 3" with my winch and big bumper, but i wanted more height so i got bigger coils $60 obo
http://i12.photobucket.com/albums/a215/tonythetiger734/0319092021a.jpg

compared to RE 4.5" (these RE's measure 21" top to bottom... FWIW)
http://i12.photobucket.com/albums/a215/tonythetiger734/0316091051.jpg

lower control arms. measure 16 1/4" eye to eye. bushings could use replacement and they have some rock rash. they've seen some use.... 30 buckshttp://i12.photobucket.com/albums/a215/tonythetiger734/0319092021.jpg

all this stuff is OBO. if you have anything to trade, i might be interested. really just have no use for this stuff any more and could use the cash for other stuff
Spanky88
March 22nd, 2009, 20:20
what would it cost to ship the lcas to 17325?
Hackmeister
March 22nd, 2009, 20:24
i might grab those LCAs off you anthony since i'm thinking of schooching up the xj another inch or inch and a half (to around 4-4.5") now that i only have 3 good mudders and have an SYE set up to go anyways
asp
March 22nd, 2009, 20:27
i'd rather not ship any of this... sorry spanky

(...that sounds wrong)

do it up kyle.
Hackmeister
March 22nd, 2009, 20:32
i've already got the coil spacers i can use to make it around a 4" lift. i dont think i'd have issues with shock length since the rear shock mounts are being raised, i have extended brakelines, SYE is going in, and (hopefully soon) i'll have the 4.10s in. just need to get the DD situation figured out, collect some cash and prevent my shit from getting sabotaged again.

raytheon express sound good?
asp
March 22nd, 2009, 20:40
sure. i can have my dad bring them tuesday... he's in bed already and wouldn't get the message yet.
Hackmeister
March 22nd, 2009, 20:48
yeah not a huge rush
mjma
March 25th, 2009, 05:55
shit, I'll take those LCAs if Kyle doesn't want them. I used to have the same ones but sold them for some stupid reason...
asp
March 25th, 2009, 07:17
my dad brought them to work today for kyle.


(raytheon express strikes again)
Hackmeister
March 25th, 2009, 07:27
mwahahahaha

btw what brand are those control arms? not that it really matters since it'll be way better than the stamped steel stock ones but i'm just curious
asp
March 25th, 2009, 07:31
i have noooo idea. they were the kind that got beat and didn't mind. with some new bushings and grease fittings they could be pretty ok. you're still on stock lowers? come on kyle get with the program!
Hackmeister
March 25th, 2009, 07:33
yep still on stock lowers. these will match up nicely to tossing in those 2" spacers to net me ~4.25" of lift up front, and i'll get some shackles for the back and BAM 33s!
asp
March 25th, 2009, 07:35
run 33s at your current height and trim more. and run these LCAs
Hackmeister
March 25th, 2009, 07:43
i'm going to try that first since i like the lower CG. However everything else is set up once i get the SYE in that i'll be able to go up higher anyways if necessary. i gotta cut and fold the rears and i should be able to stuff some 33s
asp
March 30th, 2009, 19:06
kyle bought the LCA's. rest of the stuff is available. make me an offer. i want it gone.
asp
March 31st, 2009, 17:39
shocks are under agreement. as good as gone though.

somebody buy the springs.
asp
April 7th, 2009, 11:18
still have the coils. make an offer. would prefer not to ship.
PosiDave
April 28th, 2009, 04:32
I'll buy the Coils is you will ship.
asp
April 28th, 2009, 04:38
everything is sold, thanks.