PDA

View Full Version : 96 light roll over part out


xjtrailrider
March 22nd, 2009, 20:35
I just picked this up today and before I got home most of the drivetrain is sold. Ok its easier for me to list what is already spoken for. This is a light roll over that can't be fixed(A pillars are too bent and the C pillars are tweaked). Its a straight drive/NP231 with only 98k on it.

Here is what is gone already;

Front axle and steering
T-case
Engine/tranny
engine wiring harness and ECU
tail lights
hitch and wiring
soundbar
stereo
seats and carpet
master cylinder/booster
fuel pump

Whats left;


It has all good glass with the exception of the windshield and passenger side front vent glass
3 good doors
pass front is trash
good hood
good header panel/grill
bumpers
fender flares
tires/wheels(225-75-15 all seasons on steel wheels)80% tread left
rear hatch and glass w/defrost
tan interior parts
radiator
possibly all A/C parts(I may keep that stuff for me)
8.25 3.07 rear end, probably a 27 spline. If its a 29 spline I will be keeping it.
drive shafts
drivers side front fender
Hand crank windows for you guys that want to remove your doors and not undo wiringhttp://scc4x4.com/forum/images/smilies/thumb.gif
center console for straight drive

If you don't see it just ask!

Local pick up only, I will ship smaller stuff on your dime

bigalpha
March 22nd, 2009, 20:45
Do you have the small plastic latch that keeps the console lid down?

xjtrailrider
March 22nd, 2009, 20:47
Do you have the small plastic latch that keeps the console lid down?

Yep, but it goes with the console! The interior is like new in this thing(except for the headliner)

bigalpha
March 22nd, 2009, 20:48
Dang. I don't need the whole console, just that stupid latch. I can't find it anywhere.

DansGreyMj
March 23rd, 2009, 09:05
Dang. I don't need the whole console, just that stupid latch. I can't find it anywhere.

Clifton's auto salvage and Fowlers bros in Elkton have a few complete xjs, google them they are on the same road less than 1/4 mile apart.


Sorry for the thread jack.

BruceB83
March 23rd, 2009, 14:22
PM sent on e-fan....

xjtrailrider
March 23rd, 2009, 19:47
Update on whats gone and whats left.

Here is what is gone already;

Front axle and steering
T-case
Engine/tranny
engine wiring harness and ECU
tail lights
hitch and wiring
soundbar
stereo
seats and carpet
master cylinder/booster
fuel pump
Drivers side door
All hinges
Hood
steering box
E-fan
heater control

Whats left;


It has all good glass with the exception of the windshield and passenger side front vent glass
both rear doors
good header panel/grill
bumpers
fender flares
tires/wheels(225-75-15 all seasons on steel wheels)80% tread left
rear hatch and glass w/defrost
tan interior parts
radiator
possibly all A/C parts(I may keep that stuff for me)
8.25 3.07 rear end, probably a 27 spline. If its a 29 spline I will be keeping it.
drive shafts
drivers side front fender
Hand crank windows for you guys that want to remove your doors and not undo wiringhttp://scc4x4.com/forum/images/smilies/thumb.gif
center console for straight drive
Steering column with a good air bag

If you don't see it just ask!

xjtrailrider
March 24th, 2009, 03:31
Add drivers side front fender/liner and fuel pump/sending unit to the "GONE" list.

XJerome95
March 24th, 2009, 15:11
I could use the front door-side hinges with the pins and the little clips that secure the sunvisors shipped to 30127
shoot me a pm with a price

xjtrailrider
March 24th, 2009, 15:21
I could use the front door-side hinges with the pins and the little clips that secure the sunvisors shipped to 30127
shoot me a pm with a price

all hinges are spoken for, I'll check to see if the clips are good, the roof is caved in at the sun visors.

jtdesigns
March 25th, 2009, 12:41
PM'ed.. Also need the front bumper caps if you have them.

xjtrailrider
March 25th, 2009, 15:33
PM'ed.. Also need the front bumper caps if you have them.

I got your PM, I have a set of end caps as well, $15 for the caps. $75 on the steering column. You pick them up.

It will be a couple weeks though before i get it stripped down that far.

OverTheHillsATTW
March 25th, 2009, 23:58
swaybar links?

xjtrailrider
March 26th, 2009, 03:34
swaybar links?

Yep, I still have them. PM me your zip and I'll quote you a price on them shipped

wild1joker
March 28th, 2009, 07:22
DO you still have the front driveshaft? I need it if you do. the splines on mine are worn .:new:

xjtrailrider
March 28th, 2009, 07:55
DO you still have the front driveshaft? I need it if you do. the splines on mine are worn .:new:

Yep, its still in there. I haven't got that far yet but will next weekend. Note, this is a 4.0/AX15/NP231 XJ.

wild1joker
March 28th, 2009, 08:20
great- thats what i have too. how much are you asking?Shipped to 28390. Thanks.if the price is right-I'll take it.

xjtrailrider
March 28th, 2009, 08:23
great- thats what i have too. how much are you asking?Shipped to 28390. Thanks.if the price is right-I'll take it.

$35 and you pay the shipping, shipping drive shafts is a PITA though. I will have to find some card board tubes to put it in. Due to the weight, its going to be expensive.

xjtrailrider
March 28th, 2009, 16:48
I still have some parts left!

Rear axle; 8.25 geared 3.07, don't know the spline count yet-$75
Rear hatch w/wiper/defrost/factory tint-$50
Tan interior trim parts and non power door panels, no carpet/seats/headliner-$35
Rear doors with no power and factory tint-$25 each
Passenger front door glass and hand crank regulator-$25
Center console, tan-$15
Bumpers, no caps-$15 each

There is more stuff, just ask

xjtrailrider
March 29th, 2009, 08:00
Tires/wheels-Tires have 70-80% tread left on them-$200
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010811.jpg

Rear doors w/hand crank windows and factory tint-$25 each
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010813.jpg
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010814.jpg

Steering column w/tilt and good air bag, no cruise-$50
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010812.jpg

jtdesigns
March 29th, 2009, 09:11
Hey Jon,, theres a circuit breaker that works the wipers I need also.. It's on the bottom of the fuse box in a white/clear connector. If you have it Ill take it too..

xjtrailrider
March 29th, 2009, 13:09
Hey Jon,, theres a circuit breaker that works the wipers I need also.. It's on the bottom of the fuse box in a white/clear connector. If you have it Ill take it too..

Its gone, my wipers quite yesterday and I had too have it!

xjtrailrider
April 3rd, 2009, 10:43
I still have a bunch of parts left, just ask!!!

xjtrailrider
April 3rd, 2009, 22:03
I still have lots of good stuff left;

Here is a little gem for ya, the "hump to shifter" boot for a AX15 in excellent condition!
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010817.jpg

The inside boot
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010827.jpg

NP 231 shifter and weather boot
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010818.jpg

Sport instrument gauge cluster
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010819.jpg

Black dash bezel
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010821.jpg

A full set of black flares including the front fairing
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010822.jpg
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010823.jpg
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010824.jpg

A full set of tan door panels for non-powered doors, I also have crank knobs and non-powered door latches
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010826.jpg

A good solid rear hatch with defrost and tinted glass
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010831.jpg

Tinted rear side glass
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010832.jpg
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010833.jpg

Complete front header minus the marker lights
http://i418.photobucket.com/albums/pp266/xjtrailrider/for%20sale/P1010837.jpg

I have more stuff, just ask!

jtdesigns
April 4th, 2009, 05:44
Dibs on the tranny boot..

xjtrailrider
April 4th, 2009, 05:47
Dibs on the tranny boot..

Which one? The inner or the outer.

The inner boot is kinda rare to find in good shape, I'll take $20 for that one, the outer will be $15

I have your harness and end caps packed and ready to ship, I'll get a weight on them Monday and send you a paypal request. Let me know on the boot(s) and I'll get that in the box as well.

jtdesigns
April 8th, 2009, 19:26
Got my parts today!! Thanks man!
Feel like Im leaving some sort of ebay feedback,,lol...
Great seller A+ !!!My mailman had flames shooting off his shoes the shipping was so fast!!!!!!!!!!!

xjtrailrider
April 8th, 2009, 19:42
Got my parts today!! Thanks man!
Feel like Im leaving some sort of ebay feedback,,lol...
Great seller A+ !!!My mailman had flames shooting off his shoes the shipping was so fast!!!!!!!!!!!

Thanks! Fast and easy payment as well, A+++buyer! lol!

xjtrailrider
April 15th, 2009, 17:53
Its getting easy to list whats left now since its just a shell mostly.

Here is whats left;

Steering column w/good air bag, no cruise. I also have the 2 door lock cylinders to go with it but not the hatch lock cylinder.

Gauge cluster, full instrumentation

Front header w/grill and bezels (black)

Chryco 8.25, 3.07 gears (straight drive) most likely its a 27 spline and no LS

Front bumper w/no caps, rear bumper w/caps

Dash, tan

Some interior panels and rear cargo carpet, also tan

All 4 tan door panels for hand crank windows, in excellent condition!

All 4 fender flares and front valance in good condition, black

Rear doors w/tinted glass and hand crank windows, no PDL's

Master and slave cylinder complete

Shifter boot in excellent condition

If you don't see something, just ask, I might have it!

ZacSquatch
April 15th, 2009, 19:17
Woodberry.... and the kid was driving a jeep?

Must have been his rig for when the lambo or hummer was in the shop

DrRandy
April 15th, 2009, 20:43
I'll take that 1/2 tank of gas!!

xjtrailrider
April 15th, 2009, 21:16
Woodberry.... and the kid was driving a jeep?

Must have been his rig for when the lambo or hummer was in the shop

What is "Woodberry"? The Jeep belonged to the CEO of the company I work for

xjtrailrider
April 15th, 2009, 21:20
I'll take that 1/2 tank of gas!! I sold the tank this morning so I siphoned the "liquid gold" into the trail rig!

ZacSquatch
April 16th, 2009, 14:54
What is "Woodberry"? The Jeep belonged to the CEO of the company I work for

Woodberry Forrest is like the harvard of High schools in the south.. or at least in Virginia.... My step brother got kicked out of it his 2nd year for being a dumb ass... He blew his college savings going to ritzy high schools like that

xjtrailrider
April 16th, 2009, 19:58
Woodberry Forrest is like the harvard of High schools in the south.. or at least in Virginia.... My step brother got kicked out of it his 2nd year for being a dumb ass... He blew his college savings going to ritzy high schools like that

Oh ok, thats why I never heard of it! I'm just a broke @ss country boy! It figures his kids would go to a place like that. My kids go to public school and the "school of hard knocks":D

xjtrailrider
April 26th, 2009, 21:40
Bumpity-bumpity!

I still have some good parts left!!!

Rear doors, non-power anything, but they do have the tinted glass

Steering column, no cruise but a good air bag

All 4 interior door panels, tan and in great shape. These are for hand crank windows

Front header with headlight bezels and grill

Complete fender flare set and front valance

Dash

Gauge cluster

If you don't see it, just ask!

I will be hauling this thing off soon and picking up another one so I need this stuff to go!