PDA

View Full Version : Look what I found for $400

98XJROKS
March 1st, 2009, 19:57
D44, ARB and pump, 4:56, Tera Flex Disc's. Came from a 97' TJ with 56K miles.

I need to find some e-brake cables and figure how to set up the brake system with correct valving. For now my plan is to weld on a tnt u bolt eliminator kit on.

http://i144.photobucket.com/albums/r187/98XJROKS/D44TJ.jpg
slcpunk74
March 1st, 2009, 20:16
Score!!!
DrMoab
March 1st, 2009, 20:44
I didn't revalve my brakes with the Tera disks and they were just fine. I would throw it in and see how they feel, then worry about that if you need to.
98XJROKS
March 1st, 2009, 21:40
Tell me what your opinions are about the ubolt eliminator kit vs. Perches and U bolts. It's not a cheap kit at $139
Gravesdiggerxj
March 2nd, 2009, 13:05
good score
just do perches ($15 at any mopar dealer) and u-bolts $18.75 (vatozone)
DrMoab
March 2nd, 2009, 21:25
Tell me what your opinions are about the ubolt eliminator kit vs. Perches and U bolts. It's not a cheap kit at $139

I'm running the ubolt eliminator kit and like it but.... It's not worth the money.
slcpunk74
March 3rd, 2009, 08:37
I'm running the ubolt eliminator kit and like it but.... It's not worth the money.

I was wanting to do it but what about axle hop? Is it really any less leverage on the spring then a block would be?
ZacSquatch
March 3rd, 2009, 23:25
make you own, I did on my old 99... not hard... some 2x6 tube and 1/4" plate...
98XJROKS
March 4th, 2009, 16:56
In seaching I found this.... XJBANKER made these and they turned out very well. I like the idea that I can carve out a set in any flavor. I think these are 8-9" long 2.50"-2.75" wide and 2.0 tall.

I like the adjustment holes and the height variations.

http://i144.photobucket.com/albums/r187/98XJROKS/000_0369.jpg

I don't see any reason I can't just take the plasma cutter to the TJ mounting brakets as long as I don't get into the tube, does anyone else? Seems like the cleanest, simplest way to go about that.
DrMoab
March 4th, 2009, 17:30
It was XJEEPER not XJbanker that made those
98XJROKS
March 4th, 2009, 19:12
It was XJEEPER not XJbanker that made those

Okay, my memory is slipping.....:confused1
98XJROKS
March 5th, 2009, 20:48
Well, unless I change my mind Ive decided to do a triangulated four link similiar to Clayton's. More to come..
slcpunk74
March 7th, 2009, 09:41
Well, unless I change my mind Ive decided to do a triangulated four link similiar to Clayton's. More to come..

Hmm...:rolleyes:
minimonstrxj
March 14th, 2009, 20:57
In seaching I found this.... XJBANKER made these and they turned out very well. I like the idea that I can carve out a set in any flavor. I think these are 8-9" long 2.50"-2.75" wide and 2.0 tall.

I like the adjustment holes and the height variations.

http://i144.photobucket.com/albums/r187/98XJROKS/000_0369.jpg

I don't see any reason I can't just take the plasma cutter to the TJ mounting brakets as long as I don't get into the tube, does anyone else? Seems like the cleanest, simplest way to go about that.


Wow those look sweet!!!!!:thumbup: How do I get some for me?