• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

The most requested part numbers:

JeepFreak21

NAXJA Forum User
Location
Cameron Park, CA
So, I'm about to gouge my eyes out searching for the part numbers for a 1310 pinion yoke and u bolt kit and I come up with a great topic for the FAQ section...

Post up those part numbers that people are always looking for... OEM or otherwise. Try to be as accurate as possible... multiple part numbers from different brands are always good too. I'll do my best to verify and format them and then submit it to the FAQ team.

Billy
 
Here are a few that I dug up...

1310 U Bolt Kit

NAPA/PRECISION: 32-910
NEAPCO: 1-0089
Rockford: K29428
Spicer: 2-94-28X
Motive Gear: MGUB1310

'84-'96 Oil pressure sending unit
Mopar: 56026779
GP/Sorensen: OPS140

'84-'96 Coolant temperature sending unit
Mopar: 56027012
Niehoff: TS82771/AL6206

'97-'01 Oil pressure sending unit
Mopar: 56031005

'97-'01 Coolant temperature sending unit
Mopar: 56027873

Adapter flange for using front driveshaft w/ RE Hack & Tap SYE.
Spicer: 211229x

Nut strips for rear hitch & gas tank skid
Passenger side
Mopar: 5200-1174
Driver side
Mopar: 5200-1175

Billy
 
Last edited:
Yoke for using front driveshaft as the rear driveshaft.
Spicer:211229x
 
2-4-5851-1 "1310 EY 27 Sp Dodge 8.25/ JEEP."


i came across that part number while searching for a CV yoke.
its a 27 spline pinion yoke for a Chrysler 8.25.
the place i found it lists it as discontinued but there online parts inventory shows one in stock.

i dont know if that exactly what you were looking for but thought i would post it up anyway.

3103-27CV is the CV yoke part number (GM) to make a hack and tap without using the RE style flange.
 
770K6 - 77", 6 RIB serp. belt for top mount alternators, 90, 92

fl-1A - motorcraft 5.0 oil filter for the jeep...

anything besides those two, and im writing it down before i leave the PC, my memory is shit...
 
Maybe the Ford numbers for disc brake conversions?
GC shocks for smaller (BB?) lifts?
It's not exactly part numbers, but the suspension bolts which commonly self destruct during disassembly size and thread count.
The fuel line QD Orings and inserts (they've been posted around here somewhere, it's been asked a few times)
Ford (5.0? what's the common swap) injectors?
 
ZJ Steering Parts:

OEM #s
Adjusting Sleeve (269-1134)
Tie Rod (DS1312)
Moog #s
ES3096L Short Tie Rod End
DS1312 Long Tie Rod End
 
Here's my collection...some duplicates from those above...

Up Country Suspension:
Front shocks: 4897412AC
Front coils: 52001793
Rear shocks: 04886509AA
Rear leafs: 52002392AB

Speedo Gear:
520676XX (XX represents the number of teeth on gear)
6035709 (O-ring)

Front Skid Plate:
82202851

Gas Tank Skid:
52100328AA

Nut Rails:
52001174 (Passenger side)
52001175 (Driver side)

Part number for the splash shield should be 55174736

Rear Tow Hook Bracket:
52000712

Part number for the 4mm shim is 52003976, and 52000234 for the .95mm one

Low Pressure cycling switch – 5015872-AC

part # 4882780 is the wiring harness with overhead console and keyless entry.

NAPA's UCA
NAPA #267-1372 is correct.
UPC #7 57522 47174 9

Tie rod end with a 3/4" thread on the part that screws into the tie rod = ES2848 and ES2848L

ZJ Disk brake setup:
Caliper Knuckle for a D35 (1995 Grand Cherokee):
RH - 4796342 $105
LH - 4796343 $105

Backing Plate:
RH - 4762128 $19.95
LH - 4762129 $19.95


8.8 Install items: ..
after you finish cutting/grinding off your old Ford mounts here is a short list of items with prices and sources that you might need if you are going to "refresh" or replace some of those items on the 95-03 Ford 8.8 axle :
Brake pads (P/N 6674, AutoZone) =$39.99
Calipers (P/N's C576 &C577, AutoZone)
Guide pins (2 - H15068, AutoZone)
Banjo bolts (Ford P/N 385116-S2)
Hoses (2 - NAPA P/N 380376 & 380528 )=$51.79
E-brake cables (Mopar P/N's 52008904 & 05)
"T" Hose (P/N 380889, NAPA)
2 - Hard Brake Lines(NAPA P/N 813-1208 & 813-1204 )=$6.73
Yoke Adapter (Spicer P/N 2-2-1379, NAPA)
Yoke bolts (Ford P/N N800594-S100)

Latch fix for late model XJ's:
The new handle is part# 55076016AG and is $47.70 and the new handle uses a new style adjustable link part# 55075860AB for $1.10. That will fix the liftgate not opening.
 
62103 33330 is the plu for a product called Boudreaux's Butt Paste

All kidding aside, great idea for a sticky
 
Last edited:
for those of us that deleted the stock mech fan and pulley napa part # for a new belt with the same ribs and a correct length is 060820. you can ask for a serp belt for an 83 jeep cherokee without power steering.

napa gold (wix) oil filter twice the capacity of our stock ones, 1515.

EDIT: Daystar part # for XJ/MJ shackle bushing- KJ02010BK
 
Last edited:
Quality shocks for around 3" lift, no mods and no Ranchos
Monroe Sensatrac Shocks // ZJ V8 Upcountry // 3" longer than stock both ways: #37193
Monroe Sensatrac Shocks // 86-92 Commanche // 2.2 & 3" longer than stock,#37029
Stolen from Rock Lizard's site.
 
Ridiculously complete ZJ disc list, stolen from Jeepaholics.com
Backing Plate (Left) - Part# 4762129

Backing Plate (Right) - Part# 4762128

Brake Rotor (2) - Part# 52008184

Parking Brake Lever Boot (2) Part# 4762124

Banjo Bolt (2) - Part# J4006700

Brake Caliper (Left) - Part# 4762103

Brake Caliper (Right) - Part# 4762102

Caliper Bushing (4) - Part# 4762106

Caliper Sleeve (4) - Part# 4762105

Brake Caliper Bolts (4) - Part# 5253000

Brake Hose Washer (4) - Part# J3237672

Caliper Mounting Bracket (Left) - Part# 4796343

Caliper Mounting Bracket (Right) - Part# 4796342

Flex Line (Left) - Part# 52008663

Flex Line (Right) - Part# 52008662

Proportioning Valve - Part# 52009061AB

Parking Brake Lever (Slide) - Part# 4762132

Parking Brake Lever (Left) - Part# 4762130

Parking Brake Lever (Right) - Part# 4762131

Parking Brake Adjusting Nut (2) - Part# 4762118

Parking Brake Adjusting Screw (2) - Part# 4762120

Parking Brake Adjusting Socket (2) - Part# 4762115

Parking Brake Hold Down Clip (4) - Part# 4762125

Parking Brake Hold Down Pin (4) - Part# 4762126

Parking Brake Spring 2 (Lower) - Part# 4762116

Parking Brake Spring 2 (Upper) - Part# 4762127

Rear Disc Brake Pads - Part# 4883717AA

Parking Brake Shoes - Part# 4796337
 
75 dollar 3" coil lift springs Autozone part # FCS784V
 
Last edited by a moderator:
Dana 30 dirt shields, AKA slingers, official Dana Spicer name is "SLINGER - DUST". These are the plastic disks on the axle shaft between the U-Joint and the end of the axle tube.

Spicer part numbers:
# 46849 - Used on larger shafts that have the 5-760 U-Joint (ABS & > '96)
# 35168 - All the other smaller shafts

When will this become a FAQ? We will need some way to keep inputing to the list once it is locked, IE we will need a published process to keep the list updated.
 
Back
Top