View Full Version : R/C winterfest build
GRIMUS99XJ
February 13th, 2009, 09:42
So as some may know we have been undecided on what we are going to bring to winterfest. So jeffrey and myself talked the company into giving us 5000.00 to build a XJ up and bring it up there to wheel, so we started making a list and checking it twice trying to find out whos been oh hell sorry caught carried away lol. Anyways after bout an hour or two they took the crushed are dreams (:rattle:) We have had a 97 4 banger tj in the shop with out axles and all torn apart for about 3 years now and decided that it was time to get on it. Good news is Jeffrey and myself still have total control over it but its just not an XJ. So the build begins.
Heres what we are thinking and remember we only have little over two weeks to decide order and build this before it is tested and put on the trailer to head up to attica.
1) Rough Country 4" long arm kit (no we dont offer it yet this will be the first one we have built)
2) Raceline Beadlocks with Dick Cepek Crushers 35x12R15 (never tested the tires off road so why not)
3) Caged not sure if bought or built cause of timeline
4) dana 30 and 35 (I know) both with superior axles (super 35) 4:88 gears. We would like Dana 44 but with time crunch a little hard to do.
5) Lockers front and rear: Front ARB rear Detriot
6) Rhino line the inside. probably not in time for WF
7) Get the damn thing running good as it has been sitting for right at 3 years and has not been started this whole time. And we robbed some parts from it last year to get the green Tj ready for WF08 lol
I will try to post pics and progress as I go
I posted this in Winterfest since it is the main reaon we are building it.
BOB
February 13th, 2009, 12:59
don't forget a couple of tow points, front and back.
wd-40 the skinny pedal
throw in a CB and you're set.
good luck piecing this together.
BOB
XJ&CHZ4ME
February 13th, 2009, 13:29
glad to hear that you two are getting something going. I know that even with a 4 banger Jeffery (and you) can wheel it well. Keep me posted.
GRIMUS99XJ
February 13th, 2009, 13:39
we will have our own brand front and rear bumpers with tow hooks and d rings
99SJ_Ex
February 13th, 2009, 13:44
we will have our own brand front and rear bumpers with tow hooks and d rings
Didn't know you guys did bumpers... Or are they just ones you guys build for your own rigs?
GRIMUS99XJ
February 13th, 2009, 14:27
we only have them for the tj's
XJ Stryker
February 13th, 2009, 16:10
we only have them for the tj's
Traitor , Boycott Rough Country. I could lift the boycott under bribery though. :cool:
boost_fr3@k
February 15th, 2009, 19:54
Traitor , Boycott Rough Country. I could lift the boycott under bribery though. :cool:
I second this movement. If you guys had a bumper for xjs, I'd buy it.
pix of the tj build?
GRIMUS99XJ
February 16th, 2009, 10:25
trying to get some starter pics today its a bone stock tj right now lol
GRIMUS99XJ
February 18th, 2009, 07:17
1) Rough Country 4" long arm kit (no we dont offer it yet this will be the first one we have built) Still in progress
2) Raceline Beadlocks with Dick Cepek Crushers 35x12R15 (never tested the tires off road so why not) Done
3) Caged not sure if bought or built cause of timeline Not sure if time will allow
4) dana 30 and 35 (I know) both with superior axles (super 35) 4:88 gears. Done
5) Lockers front and rear: Front ARB rear Detriot Went with Detroit front and rear
6) Rhino line the inside. probably not in time for WF not gonna happen in time
7) Get the damn thing running good as it has been sitting for right at 3 years and has not been started this whole time. And we robbed some parts from it last year to get the green Tj ready for WF08 lol Got it runnung
I will try to post pics and progress as I go
I posted this in Winterfest since it is the main reaon we are building it.
Fore Wheeler
February 18th, 2009, 07:22
you still don't have any pics.
GRIMUS99XJ
February 18th, 2009, 07:45
I got a few just need to post them. I got to get the shop camera and get them off the sd card first
GRIMUS99XJ
February 19th, 2009, 09:40
hers some pics from the start
http://c2.ac-images.myspacecdn.com/images02/40/l_197070584bdb4068bbd2896c8452edd5.jpg
http://c1.ac-images.myspacecdn.com/images02/53/l_3247daf943674968a5e43adf5c6c9cdc.jpg
http://c4.ac-images.myspacecdn.com/images02/40/l_2b1008326fce4c4180523eba14901b4f.jpg
will post some more when its able to roll lol
cal
February 19th, 2009, 12:41
I heard there's a NOS fogger kit going on this 2.5l..
GRIMUS99XJ
February 20th, 2009, 10:32
http://c2.ac-images.myspacecdn.com/images02/14/l_8d27498ae0704d1f962091a08c56d91d.jpg
http://c4.ac-images.myspacecdn.com/images02/60/l_1ac1042948ec4e03be1cfc260a667a73.jpg
http://viewmorepics.myspace.com/index.cfm?fuseaction=user.editAlbumPhoto&albumID=1308472&imageID=20074359
just a few more pics
XJ&CHZ4ME
February 20th, 2009, 10:35
there ya go again showing pics of your rod...ends :D
Rev Den
February 20th, 2009, 13:26
Hope it has heat.
:D
Rev
RoughCountry
February 20th, 2009, 13:57
it will but without a top it may be difficult
cardboard
February 21st, 2009, 18:32
Looks like it has a top to me. Or did I miss something?
GRIMUS99XJ
February 23rd, 2009, 10:48
after the cage the top may not get put back on lol
GRIMUS99XJ
February 26th, 2009, 14:09
just an update:
Steering done and long arm kit is done
axles gears and lockers tomorrow and wheel and tires monday
starting on cage tomorrow as well hopefully get in done in time to get powder coated if not rattle can here we come lol.
all should have been done besides the cage but like anything else we got delayed due to back orders on the gears and the wheels. but all has shipped now so just a matter of time now. I will post some pics soon
GRIMUS99XJ
March 5th, 2009, 11:54
rolled the jeep out of the shop for a test drive yesterday evening and let me tell you damn that 4 banger motor sucks lol. Oh well drove pretty good and flex was awesome. will post pics in a minute got to get them off of the camera.
still got a few more things to do to it then it is done
GRIMUS99XJ
March 5th, 2009, 13:44
http://c4.ac-images.myspacecdn.com/images02/8/l_f8313182cb8042d6b90e84e7dd9ffabf.jpg
gears axles and lockers
http://c4.ac-images.myspacecdn.com/images02/24/l_d70a783571c44d7cb46955a3c127bc93.jpg
tires and beadlocks
http://c3.ac-images.myspacecdn.com/images02/24/l_6fe228a15a4e4aff940521ea0691bcf2.jpg
cage during install
http://c1.ac-images.myspacecdn.com/images02/31/l_b90c296c9f35469385d3ee2174b763c0.jpg
almost done just ramping it out to check travel and clearence
praetorian
March 7th, 2009, 19:28
What are the specs on those wheels?
vBulletin® v3.8.3, Copyright ©2000-2012, Jelsoft Enterprises Ltd.