PDA

View Full Version : 37's

Avanteone
September 27th, 2006, 08:17
SO, I got my steel wheels yesterday and mounted up one of my 37's to check for clearance. I gotta add a little bumpstop in the rear and trim a little bit in front, but not bad. Here's some pics:

True to their size. 20lb of air, sitting on the floor, the 35" measure 35" and the 37" measures 37"
http://img.photobucket.com/albums/v637/Avanteone/DSCF00253.jpg
http://img.photobucket.com/albums/v637/Avanteone/DSCF00273.jpg

Now I just gotta wait for the DIY weld on bead lock kit
http://img.photobucket.com/albums/v637/Avanteone/DSCF00263.jpg

Front BEFORE shot with 35x13.5" and 3.75" BS
http://img.photobucket.com/albums/v637/Avanteone/DSCF00283.jpg
And after with 37x12.5" and 4.25" BS
http://img.photobucket.com/albums/v637/Avanteone/DSCF00303.jpg
http://img.photobucket.com/albums/v637/Avanteone/DSCF00293.jpg
http://img.photobucket.com/albums/v637/Avanteone/DSCF00313.jpg
http://img.photobucket.com/albums/v637/Avanteone/DSCF00323.jpg
http://img.photobucket.com/albums/v637/Avanteone/DSCF00333.jpg
http://img.photobucket.com/albums/v637/Avanteone/DSCF00343.jpg
http://img.photobucket.com/albums/v637/Avanteone/DSCF00353.jpg
http://img.photobucket.com/albums/v637/Avanteone/DSCF00362.jpg
norcal420
September 27th, 2006, 08:59
Nice...

BTW, thanks again for that knuckle...

DR
dallas xjs
September 27th, 2006, 09:23
total props or you rig....very nice
aparke4
September 27th, 2006, 09:30
those are the best tires imo for off road use... i am jealous what is you axle setup and what size are the rims?
aparke4
September 27th, 2006, 09:31
oops 17 i see axles? i see a truss too homemade?
Avanteone
September 27th, 2006, 09:44
OK, so one response and two PM's asking for specs, I'll post some up:

Fr. axle is '79 F150 HP D44 narrowed/retubed to waggy width. Yukon alloy shafts and Super Joints. Full detroit and 4.88's. Chevy flat top knuckles and ford outers (5 on 5.5") RE bracket kit, RockStomper hyrdo assist kit, PSC hi-steer arm, custom steering

Rr. axle is Explorer 8.8. Dutchman alloy shafts. Full detroit and 4.88's. Disk brakes, 1" spacers to match front width and bolt pattern.
JBweld
September 27th, 2006, 09:47
Nice John! I'm jealous man.

I was wondering why you aren't using the beadlocks you already have. So they're 17's ?
Avanteone
September 27th, 2006, 10:02
Nice John! I'm jealous man.

I was wondering why you aren't using the beadlocks you already have. So they're 17's ?

Yeah, old ones are 35x13.5"x15 and the new ones are 37x12.5x17"

J
IXNAYXJ
September 27th, 2006, 11:05
I like the new look so much better, John. Looking forward to see how they work this weekend!

-----Matt-----
Avanteone
September 27th, 2006, 20:47
Couple of driveway shots. I honestly don't know if I like the look... I dunno if it's the BIG wheels, or the black wheels, or no beadlocks... or what, but it just looks goofy to me. I'll do some trimming and modify rear bumpstops tomorrow and I'll get some flex shots:

http://img.photobucket.com/albums/v637/Avanteone/DSCF0037.jpg
http://img.photobucket.com/albums/v637/Avanteone/DSCF0038.jpg

John
aparke4
September 27th, 2006, 22:41
yeah the 17 inch rims look a little goofy thats why i asked first... do they come in a smaller rim size? are you going to use beadlocks eventually?
2xtreme
September 28th, 2006, 00:26
Maybe the wheels/tires are just too clean:)

Looks good John. I thought they were a 37x13.5x17? No?

Did you just trim your rear quarters? I don't remember them being trimmed before?

Michael
88bluecrunched
September 28th, 2006, 04:40
Man I had to clean the drool off of my keyboard after looking at those tires I love Krawlers and some day hope to get a set of my own.
Avanteone
September 28th, 2006, 07:02
yeah the 17 inch rims look a little goofy thats why i asked first... do they come in a smaller rim size? are you going to use beadlocks eventually?

37's come in 37x12.50x17 ONLY... and yes, I have a DIY beadlock kit on the way soon from Sky's Extreme Offroad in utah.... I just couldn't wait to get 'em mounted and see what they looked like.

J
Avanteone
September 28th, 2006, 07:04
Maybe the wheels/tires are just too clean:)

Looks good John. I thought they were a 37x13.5x17? No?

Did you just trim your rear quarters? I don't remember them being trimmed before?

Michael

The 35'x are 13.5 wide, the 37's are 12.5"

Quarters have been trimmed for a year or better... just with my old bumper there was 2x4" steel coming up the sides. I bent that one and built this one last month and haven't decided for sure what I'm gonna do. It will probably be tube coming forward from the bumper, then tie into the "frame", then have tube fenders go up and over the wheelwell and tie into the rockers.

J
IXNAYXJ
September 28th, 2006, 10:28
I really like the tall and skinny look. The 17" are kinda goofy, but with beadlocks it should be a little better.

-----Matt-----
mud1059
October 2nd, 2006, 21:05
Common sense evades me from time to time, so bare with me. I love the looks of the krawlers, and I know they're great for rocks from what I'm told. However, with lugs bigger than my fist, doesn't that take the space for more lugs away? In turn, wouldn't that be taking away more lugs for more opportunities to move/grip objects?
Avanteone
October 2nd, 2006, 21:34
Common sense evades me from time to time, so bare with me. I love the looks of the krawlers, and I know they're great for rocks from what I'm told. However, with lugs bigger than my fist, doesn't that take the space for more lugs away? In turn, wouldn't that be taking away more lugs for more opportunities to move/grip objects?

They have worked great for me in rocks, snow, mud, dirt, etc. Hands down, best tire I've ever run.

J
mud1059
October 2nd, 2006, 21:52
I'll take your word for it. Don't get me wrong, I'm not doubting them, just questioning them is all.
Roads
October 11th, 2006, 08:46
I like the look of the D-hole rims alot personally.
Avanteone
October 11th, 2006, 09:07
My beadlocks from Sky's Extreme Offroad (SXOR) will be here shortly :)
2xtreme
October 11th, 2006, 10:27
John,

Are you going to groove the 37's?
Michael
xjmania
October 18th, 2006, 18:22
how much is the Krawler a piece?
Avanteone
October 18th, 2006, 18:48
how much is the Krawler a piece?

Price? or Weight?
goblazers_6
October 19th, 2006, 19:38
ok in that set of pictures there was a mj. whats going on with that,

nice taillights by the way
Avanteone
October 19th, 2006, 20:15
ok in that set of pictures there was a mj. whats going on with that,

nice taillights by the way


This one?
http://img.photobucket.com/albums/v637/Avanteone/Copy3ofDSCF0272.jpg

It belongs to my tech., Jason. He is Comanchekid on here.

Shortbox MJ, Waggy D44's, 37" Creepy Crawlers.

J
goblazers_6
October 19th, 2006, 23:00
god, that looks so awesome - cant wait til mine gets there