• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Noob just finished first lift . .got a question

sewerrat

NAXJA Forum User
I had a 1.5" coil spacer in the front and a block in the rear that bgcntry put on my rig about 2 years ago.

The back was sagging and bottomed out when two people were in the back, so I wanted to beef it up.

Just got done putting in Rusty's 2" AAL and now the back sits about 1" higher than the front. Should I just leave it be and let it sag/settle down to even or get 2" coils for the front?

This is not a trail rig, but a daily driver meant to clear 30" tires easily and maybe pull a trailer without bottoming out.

Thanks
 
Load it up & drive it for a week or two. It should settle a little. JIM.
 
Leave it.

My Rusty's 2" settled about 1 1/2". But I did load the crud out of it, with about 500 lbs of gear inside, and about 1500 lbs in a utility trailer.
 
Back
Top