PDA

View Full Version : Pass. side mirror bracket

HaleYes
January 27th, 2009, 07:40
I need the plastic piece that attaches the mirror to the Jeep. The mirror (break-away design) has 2 vertical pins that attach to the piece that I neeed. The piece I need then attaches to the Jeep with 5-6 screws. I believe that all years up to 97 will work.
cardboard
January 27th, 2009, 15:30
Hey Hale this must be fate I was just getting ready to post the exact same wanted post but I am looking for the drivers side. There is about 7 xj's at my local salvage yard and if it stops snowing and sleeting and raining before sat I am going to go looking. If I see a p/s there I will pick it up for ya, and bring it to WF.
cardboard :cheers:
HaleYes
January 27th, 2009, 15:37
Hey Hale this must be fate I was just getting ready to post the exact same wanted post but I am looking for the drivers side. There is about 7 xj's at my local salvage yard and if it stops snowing and sleeting and raining before sat I am going to go looking. If I see a p/s there I will pick it up for ya, and bring it to WF.
cardboard :cheers:

Awesome! Very much apperciated!:thumbup:
IllianaXJ
January 27th, 2009, 16:02
I've got a pair of mirrors in the shed from a 1st gen XJ. I'll check in the AM to see if they have the brackets or not.
XJ&CHZ4ME
January 28th, 2009, 13:09
I have a drivers side mirror that is the cable adjuster w/ the "break away" bracket. If you want it Cardboard, $12 (just covers shipping) shipped in a flat rate box for the whole thing. The whole mirror assembly is in excellent shape. PM me if interested.

Hale, I think I have a pass side mirror that is busted with a good break away plate, I will have to check on that one though, no promises it is good.
BOB
January 28th, 2009, 13:15
I need the plastic piece that attaches the mirror to the Jeep. The mirror (break-away design) has 2 vertical pins that attach to the piece that I neeed. The piece I need then attaches to the Jeep with 5-6 screws. I believe that all years up to 97 will work.

I am looking for the same part...so, if there are more than one, I am next in line to purchase. (is this a hi-jack?)

Thanks!

BOB
cardboard
January 28th, 2009, 14:51
Let me see what I can find at the yard first if you dont mind. I have a practically new mirror at the moment. Ill get back to ya. Cardboard
sw_mi_xj
January 29th, 2009, 04:08
i may have one of these brackets , unless of course it is the part that broke when i ripped the mirror off . i will look .
IllianaXJ
February 4th, 2009, 13:47
Mike - I had one of these in the shed, but broke it trying to get it off the mirror :doh:

I think it will still work, it just chipped off part of the "U" on the front side.

I can get a pic if you want to see it.
HaleYes
February 4th, 2009, 13:59
Sure.

Or....just bring it with you to WF.
IllianaXJ
February 4th, 2009, 15:50
Or....just bring it with you to WF.

:thumbup:
HaleYes
February 26th, 2009, 18:43
Anyone find anything? Byron is the only one I've heard back from and his isn't 100% usable.
XJ&CHZ4ME
February 27th, 2009, 04:31
Mike,I will bring a whole pass mirror assembly to WF with me and will let you try and take it apart so I am not the one who breaks it :D
cardboard
February 27th, 2009, 14:22
Mike the yard I went to says it is part of the complete mirror assembly, therefore he wants $30.00 :bs:.
I just super glued mine again, so maybe I can get it through WF before it breaks again.