85cherokoholic
NAXJA Forum User
- Location
- kentucky
i think this might be the reason why my front wheels are not moving, i put it in 4low, i feel the jerk and only my rear wheels are turning, any suggestions
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
front axle vaccum? maybe
- Thread starter 85cherokoholic
- Start date
- Location
- East of Cincinnati
Common problem.
Search for "vacuum," not vaccum
and "actuator" or "disconnect."
You'll find its either the vacuum lines leaking (or pulled off) or the shift fork mechanism. It's in the pass side of your axle, where the upper control arm mounts...
Good luck!
Robert
Search for "vacuum," not vaccum
and "actuator" or "disconnect."You'll find its either the vacuum lines leaking (or pulled off) or the shift fork mechanism. It's in the pass side of your axle, where the upper control arm mounts...
Good luck!
Robert
4wdParakeet
NAXJA Forum User
- Location
- Olathe, Ks
do your self a favor... Pick up a non disco. You can find all kinds of D30 non disco's for cheap as people upgrade. Keep an eye on the local forums and you can find one on the cheap.
Parakeet
Parakeet
