Bumper Question

[Generalcuz]

Anyone have or know of a good place around Denver to pick up an aftermarket bumper for my XJ? (Want to support local guys and save on shipping) All I am looking for is one that has two points to mount my D-Rings and get rid of the cheap looking stock bumper in the process. I don't want a spare tire carrier since my roof rack addresses that issue.

Thanks

[philip_g]

can't help you- but what-choo-doing with that stocker? Mine is bent to hell and maybe I can subsidize your quest a little :D

[riverfever]

Yell at Martin over at Rock Lizard Fabrications. He's down in the Springs.

He's GottaBeJeep on the boards.

-river

[jdogg4]

I might be fabbing a simple one for my jeep so philip_g you can have mine if you want. Well it's off or will be off a 2001. Won't be for a month or so, but I'll post it up when I'm ready to pull it. It's a bit scratched up on the bottom edges from moab, but not all that bad.

[philip_g]

I might be fabbing a simple one for my jeep so philip_g you can have mine if you want. Well it's off or will be off a 2001. Won't be for a month or so, but I'll post it up when I'm ready to pull it. It's a bit scratched up on the bottom edges from moab, but not all that bad.
far as I know it'll fit, mine's all bent and held on by one bolt :)

[jdogg4]

well that isn't good at all now is it.

[philip_g]

..and it's not even that tight. I pulled the bumper while I was doing the crank pulley and never really got 'er back on there too good.

[Generalcuz]

Thanks. I will check him out.

[Silverstreak01]

thats who i got my front one.. hes going to be building me a rear. generalcuz you should tell them how much you want to spend :)

[jdogg4]

..and it's not even that tight. I pulled the bumper while I was doing the crank pulley and never really got 'er back on there too good.

Are you looking for a front bumper or rear? I have the front one sitting on the side of the house ready to go any time the back one is still on the jeep and it's going to be a few months before it comes off. Do you need fender trim and all that aswell????

http://www.imagestation.com/album/pictures.html?id=2117062895


Let me know your more than welcome to the front one aswell. It's free even. Thats right FREE! I like beer I'd never turn skinny dip or sunshine down. I might be heading to denver this weekend saturday. have another guy that wants some lower control arms. Another guy that wants some stocker tires and to hang out with a buddy sense there isn't going to be a meeting this weekend. Let me know I'll toss it in the back with all the other stuff.

[philip_g]

Are you looking for a front bumper or rear? I have the front one sitting on the side of the house ready to go any time the back one is still on the jeep and it's going to be a few months before it comes off. Do you need fender trim and all that aswell????

http://www.imagestation.com/album/pictures.html?id=2117062895


Let me know your more than welcome to the front one aswell. It's free even. Thats right FREE! I like beer I'd never turn skinny dip or sunshine down. I might be heading to denver this weekend saturday. have another guy that wants some lower control arms. Another guy that wants some stocker tires and to hang out with a buddy sense there isn't going to be a meeting this weekend. Let me know I'll toss it in the back with all the other stuff.

Nope, that is EXACTLY what I need

http://www.imagestation.com/picture/sraid195/pf8545b4808e54f669a2e476b8abc30cc/f14f9d9c.jpg

let me know what kind of beer you like and where you'll be, I'm in castle rock but I can come to you.

damn any more control arms for sale?

[jdogg4]

PM sent phil.