• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

starter help needed ASAP

cdnabn49

NAXJA Forum User
Location
Alberta
96 XJ 4.0
ok, I am a noob and this is my question:
I think my starter is kaput... key in - battery power
and nothing... no woooow wooooow woooow / clicking / nada / zip

is it gone dead?:doh:
 
try to jump the posts on the starter and see if it works. If that works then turn it back off and try to start in neutral.
 
Are you sure it's not the starter solenoid? Easy enough to check, and A LOT cheaper than new starter. Best done w/2 people and a good length of cable(jumpers work). Jump straight from batt. to starter post FROM solenoid to starter (hit starter side).
 
could be... but the core is at NAPA and and it's -16 out... the started is changed and I'm warm now... and getting ready for the 35 mile commute... as per what the FSM both are supposed to be changed out as a "unit."

Could / should they be changed separately???

NAXJA

Ps. I was cold and cranky...
 
They sell just solenoids. Swapped only solenoid on mine. It's an '89 (RENIX) though, dunno if/how things changed from then to '96.
 
Back
Top