rear drive shaft

f1tbiker6 · Nov 10, 2008

well im almost ready to do the 4wd swap. but i need to know what i should do about my rear drive shaft. get a new one, or have mine shortened?

ive got a 1989 2wd comanche. and im putting an Aw4, with np231 in it.

ehall · Nov 10, 2008

easiest and cheapest is to pull one from a 4WD with similar axle

igotanxj · Nov 10, 2008

ehall said:
easiest and cheapest is to pull one from a 4WD with similar axle

x2
Just visit your local junk yard and get one for $20. Or, get a front one and do your own hack and tap SYE.

Phil · Nov 10, 2008

igotanxj said:
x2
Just visit your local junk yard and get one for $20. Or, get a front one and do your own hack and tap SYE.

Except it'll be WAY short on an MJ.

You'll be fine keeping the slip yoke, either find a shaft IF you can, or just have yours shortened, but the classy thing to do would be get a fixed yoke kit for the t-case and have a driveline made.

rear drive shaft

f1tbiker6

NAXJA Forum User

ehall

NAXJA Member

igotanxj

NAXJA Forum User

Phil

NAXJA Member

Similar threads