Ruffstuff Diff Cover Giveaway, Any Cover We Make!!!

[Dan Fredrickson]

Ok, We like to regularly give a little back to help support the community so here is our first giveaway on NAXJA.......

To qualify you have to be a NAXJA member and sign up both here and register at our website ( www.ruffstuffspecialties.com (http://www.ruffstuffspecialties.com) ). We ask for that so you can see just what we have to offer, in exchange you get the chance to win 1 of 3 prizes!

The winners will receive:

1st Place - Differential cover of choice, from a 14 Bolt to a D30, every one of them is 3/8" thick!

2nd Place - $100 Store credit, good for anything we make! Many of our covers are only $100 so this may be as good as first place!

3rd Place - $50 Store credit, good for anything we make!

http://ruffstuffspecialties.com/gallery/albums/model1/normal_8.jpg
Holly has done a couple of drawings for us so I am looking forward to it as much as you are!:wow:

On any winners prizes we will cover the shipping......Only 1 entry per person, Do it now! The drawing will be held October first.......

If you have any questions call Dan @ 916.600.1945

This is definately:spam:

[nhrocker]

I'm in! Just signed up and checked out some of your products, some good stuff in there I could use.

[5-90]

Good stuff...

I'm in! I like the idea of drainplugs on axles - can you also do a counterbore on screw holes, or just a countersink? Just wondering...

5-90

[Dan Fredrickson]

Good stuff...

I'm in! I like the idea of drainplugs on axles - can you also do a counterbore on screw holes, or just a countersink? Just wondering...

5-90

I will try and answer your question as fully as possible so you don't have to repost, if you have any further q's give me a call.

We can counterbore, we actually use a counterbore to clear the welds around the holes for standard bolts but we don't penetrate the ring. We really prefer countersinking the holes rather than counterboring the holes. The reason is that a countersink allows the Allen bolt to completely spread the load over the entire hole, and the countersunk area is much larger than the area covered by the stock bolts due to the 82 degree angle. A counterbore provides even less surface area than the stock bolts due to the barrel shape and small shoulder of the bolt. Therefore a counterbored Allen bolt receives all of the force upon impact in a very small area (the bolt shoulder) causing more potential problems, and a common Hex bolt would not fit and stay within the ring edge even using the thinnest of thinwall sockets.

I hope this makes sense because it s very late and I am not sure it makes complete sense to me!

[5-90]

Actually, it does make sense quite well (and I'm posting here so others can benefit from this exchange...)

That just means I'll have to keep some flat head screws on hand, in addition to the standard Hex Head capscrews, Socket Head capscrews, and all the other stuff I keep around... No trouble finding them, tho - I've got plenty of sources!

5-90

[HilltopXJ]

Im in, thanks for your support

[brokexj]

I'm in, thanks!

[Gerr]

Im in!

Thanks for supporting Naxja

[Skullver]

Im in, thanks for the chance

[BRIANHO13]

In, if I win first place could I trade it for a d44 cover?
THanks for your support.

[ROBZ95Xj]

Im in, thanks

[IntrepidXJ]

count me in.....i need one for my d30 :D

[shortxjdoug]

i'm in...... i like stuff :D

[HaleYes]

Done, Thanks for the oppurtunity.


Hale

[chelms27]

I got an account at ruffstuff, and here, but how do I register for the drawing?

[whatevah]

count me in! :)

thanks for supporting NAXJA!

[Dan Fredrickson]

I got an account at ruffstuff, and here, but how do I register for the drawing?

You just did, since you already have registered at Ruffstuff and are a member here all you had to do was post up here.....

[ruggedjeep]

Im in... :party:

[Kittrell]

Why not, I'm in.

[Ramsey]

thanks:thumbup:

[GreenbeltXJ]

im in too

[Osprey413]

I'm in.

[Jeepsterboy101]

I'm in, thanks.

[Rocketman]

I'M IN

[P1atinum]

count me in on this one as well,

thanks

Also checked out the site, Good priced fab items.

[rokclimbertx]

IN... fingers crossed

[old_man]

I'm in. It would sure look nice on my new HP44.

[Menzenski]

I'm in. Thanks for supporting NAXJA!

[packratt53]

I'm in --- thanks

[xjkevin]

did it im in, thanks for the chance.

[chelms27]

well, I guess I'm in then, thanks

[KSXJ]

Your stuff looks great! Count me In!

[sgtmack]

Thanks for the support! Count me in.

Do they come in yellow?:cool:

[scoobyxj]

I'll bite. I do need to start using some protection for my rear end.

[joecool]

Count me in, and thanks again for supporting NAXJA!!!

[CanMan]

Put my name in the hat. Thanks for the chance.

[Rev Den]

In.

Thanks for your support.


Rev

[ILLXJ]

I'm in. One of those would be a great b-day present. Thanks. JIM.

[Vlad]

sweet

[lobsterdmb]

I'm in, thanks for supporting NAXJA

[RayBecker]

OK, I'm in...and thx

[Gil BullyKatz]

count me in...

thanks!

[dj's 2000 xj]

My hats in the ring, Thanks for the great opportunity! I saw site last week, good stuuf in there :)
neeser77@hotmail.com on the site!!! thanks again

[best88xj]

Im in! Still adding more and more to my xj. Will keep hunting your site for parts

andrew

[XJourney]

I am in. I like the site, alot of great fab parts.

[woody]

I'm in... thanks for the chance!

[Sting25]

count me in..

Thank you

[GI-John]

In, thank you!

[jmowens]

Count me in, thanks for supporting NAXJA!

[RWKHausSupply]

I need a 8.8 one to match the D30 one I got from ya, soo...

COUNT ME IN :rof:

[jdougn]

x51

[MogifiedXJ]

I am in as well,

Thank-you

[87manche]

all signed up.
thanks for the chance.

[FitchVA]

in ! thanks

[mingo]

Count me in.... Thanks

[prb24]

In...Thanks.

[djblade311]

gracias! I'm in...

[DaJudge]

IN! Thanks!

[IslanderXJ]

Im in too, thanks for the chance!

[ADVNTURR]

Count me in!. Definately some nice looking stuff on your site and who doesn't need to change their diff fluid anyways. Thanks for the chance!

[Dirk Pitt]

In thank you!

[90exjay]

I'm in nice lookin stuff.

[ckh550]

Well I'd like to be in, but I can't get on the site to register...anyone else having trouble?

Chris

[Dan Fredrickson]

I just did a test registration and it seems fine? You are In!

[XJ_ranger]

Im in...

and need to call you...

[Kejtar]

Count me in :D

[planefixer]

I'm in.

[rhino]

I'm in...going to register now!!

Thanks for the awesome products!!!

[jrowell]

I love free stuff!

[onetallmj]

Can't win it unless I am in it!!!

gonna register now.

[Starboard M]

Can 4th place be a date with the drawer? :gee:

Either way Im in. Thanks

[SteelblueSteve]

registered and in

[Dan Fredrickson]

Can 4th place be a date with the drawer? :gee:

Either way Im in. Thanks

That would have to be the grand prize!:heart:

[stewie]

registered and in. awsome diff covers!

[lost1]

I'm in!

[erikwylie]

I'm in thanks for the support!

[Lawn Cher']

In, thanks!

[lazyxj]

I'm in.
Lots of nice pieces.

[xj-up]

Sweet, I'm in

[98XJSport]

Signed up, nice site. Thanks for the support!

[Mike L]

In it to win it.

-Mike

[Jeff 98XJ WI]

I'm in. I saw your products in a recent thread and really like the diff covers that one can finish welding on their own. Jeff

[MontanaXJ]

I'm in.

Greg M.

[crasy1_69]

I'm in...

[xjlilred8706]

im in. free stuff is always cool.

[karstic]

Done and Done

More pics of Holly please!

[apsdad]

Count me in.

[Lonestar]

count me in

[cal]

count me in

[sw_mi_xj]

count me in , thanks .

[EricT]

all signed up

[Boghog1]

Sign me up please!

[jeepboy_90]

Count me in.

Thanks for supporting NAXJA.

Nice website. lots to offer

[ricot83]

count me in please

[Ben H]

Thanks for the support. I am in.

[ROOK1]

I will take the pair. Oh um, whatever you got. Is it hot in here?

[DrMoab]

oh man...I really need one of those.

Im in baby...Im in!

[LilRedRover]

Sign this guy up, my jeep isn't running right now, but it will be soon.

[ChuckD]

I'm in, but your website isn't working.

[Dan Fredrickson]

Doing the fixit right now, POS server provider......

[85xjwoody]

Thanks for the support. I could use a good cover.

Kim.

[w_howey]

Count me in.

Umm.. another site to spend all the wife's money on.

[jeepdude10000]

me too

[Highlander]

IN!!!!

Thanks for the opportunity!!!!

[88flexj]

Done, and done. Thanks for the chance.

[fireLt.]

Count me in. That would make an awesome replacement for the Rusty's guard that still lets the cover lip fold over and leak.! Thanks for the support!

[swany]

i'm in nice site.

[goodburbon]

count me in

wouldn't have even known about you without your support to this site

Thanks!

[mud1059]

I'd like to be included please. Great lookin products. Do we have a date set for the drawing? Lookin forward to a phone call :D Thanks boss.

[ajeeperwannabe]

count me in... and thanks for supporting NAXJA

[BonesBrosChris]

Good to you again Dan. You have some nice products. I'm in!

[xjj33p3r]

Enter me in this fabulous giveaway pleeeeeease! :spin1:

[tysonxj]

Sign me up!

Thanks,
Chris

[KellyS.]

I'm in.

[MY92XJ]

Count me in please

[offroadman83]

I'm game!!!

[badbowtie87]

please sign me up!! Thanks Brandon

[theslacker]

Cheers. I'm in

[Mudskipper]

I'll take one for the front and then I'll buy another one for the rear.

[LilRhodyXJ]

Im in thanks for the opportunity!!:rof:

[Colorado_XJ]

Color me in! Thanks for the chance!

-Rich

[Kaczman]

In. I could use one for the new 60. Thanks for the chance.

-Jon

[rmm727]

Im in

[mdl]

I'm in please :)


Thanks for the opertunity

[Mr.OverKill]

proabably too late but i want a try

[IslanderXJ]

Which lucky bastards won these awesome prizes?

[bronco2man]

i'm in just registered in your site

[HaleYes]

Which lucky bastards won these awesome prizes?
Hey!
I resemble that remark!


http://www.naxja.org/forum/showthread.php?t=98898