-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Edelbrock Jeep Shorty Headers
- Thread starter cdnabn49
- Start date
seanyb505
NAXJA Forum User
- Location
- Simpsonville, SC
http://www.ineedparts.com/auto-part...st-manifolds/jeep-exhaust-manifold-15343.html
Look familiar? This one has not given me trouble for two years since installation.
Look familiar? This one has not given me trouble for two years since installation.
Jeepsloth
Gort like Jeep
- Location
- North Carolina
Yup!
this is the one I am going to have installed... time unfortunately is the killer... I need the jeep back for my 70 mile round commute... at almost $700 for a stock manifold the locally bought $400 header is a deal...
http://www.quadratec.com/products/17602_300_07.htm
http://www.jeepsandstuff.com/edjeshhe.html
ow for AMC/Jeep. High-quality Edelbrock Shorty Headers bolt directly to the factory crossover pipe with no cutting or welding required for installation. These new headers feature 1-5/8" diameter cold rolled mild steel tubing that is CNC mandrel-bent for superior flow. Durable flanges are 3/8" thick (Jeep 4.0L headers are 1/2" thick), laser-cut, and robotically welded. Available with new Ti-TECH coating or high quality ceramic coating for the ultimate protection against corrosion, this is a premium line of headers for outstanding performance and quality. 50-state street legal.
http://www.edelbrock.com/media/news/2008/automotive/093008.html
http://www.quadratec.com/products/17602_300_07.htm
http://www.jeepsandstuff.com/edjeshhe.html
ow for AMC/Jeep. High-quality Edelbrock Shorty Headers bolt directly to the factory crossover pipe with no cutting or welding required for installation. These new headers feature 1-5/8" diameter cold rolled mild steel tubing that is CNC mandrel-bent for superior flow. Durable flanges are 3/8" thick (Jeep 4.0L headers are 1/2" thick), laser-cut, and robotically welded. Available with new Ti-TECH coating or high quality ceramic coating for the ultimate protection against corrosion, this is a premium line of headers for outstanding performance and quality. 50-state street legal.
http://www.edelbrock.com/media/news/2008/automotive/093008.html
Last edited:
hubs97xj
NAXJA Forum User
- Location
- Fort Wayne, IN
$700 for a stock manifold? I hope that's installed. It shouldn't even be $100.
Notice anything about the Edelbrock and the APN, Rugged Ridge, or Banks headers?
Notice anything about the Edelbrock and the APN, Rugged Ridge, or Banks headers?
stephenspann27
NAXJA Forum User
- Location
- College Station, Tx
I have Edelbrock shorty's on my '95 camaro.. one of them cracked at the collector..
hubs97xj
NAXJA Forum User
- Location
- Fort Wayne, IN
nevermind, enjoy.
Last edited:
Cool, I appreciate all the help I have received from here... it really boils down to time and I have been looking and reading a lot of information and decided to go with a brand name header... if it craps out I will have been educated... if it works cool and kudos... from what i understand there is a lot of sub standard mild steel being used in the cheap ones and Edelbrock seems to have a good rep with customer quality satisfaction... I am going to run a 2" flowmaster exhaust with it... I have Mickey Thompson 32" Baja's on it and could use a few more ponies with the Fpik kit as well...
wolfpackjeeper
NAXJA Forum User
- Location
- 500' and 500KCAS, RAF lakenheath
run 2.25in and a dynomax superturbo, or a borla. the flowmasters are one of the worst "performance"mufflers out there. Unless you are in love with the sound, then go for it I guess.
