PDA

View Full Version : FS: Ford 9" with discs

desertfox1023
November 3rd, 2008, 20:58
I've decided to sell my Ford 9" that I was going to put in the XJ. It came out of a Lincoln mark 5, around a 77 year model. It's a big bearing, 31 spline, Disc brakes, 2.50 gear, stock open carrier, and 5X5 bolt patten. It is one of the shortest 9" there is. It's actual a little shorter than a D35c but I can't remember the actually measurements on it. If interested send me some offers. Located in Charlotte / Graham, NC.

http://usjeeps.com/forum.php/host/thum_423048c2037cd48c7.jpg
wolfpackjeeper
November 3rd, 2008, 21:30
I believe the number you are looking for is 57"wms. could be wrong though

I got lucky and snagged one with a 61" wms
Tim88XJ
November 4th, 2008, 20:31
IIRC these axles are 5x4.5 bolt pattern
Ghost
November 5th, 2008, 07:25
Can you send me some pictures of the brake set up? How much? picturem@bellsouth.net
desertfox1023
November 5th, 2008, 10:55
IIRC these axles are 5x4.5 bolt pattern

I'm pretty sure its a 5x5 not a 5X4.5
desertfox1023
November 5th, 2008, 11:07
Can you send me some pictures of the brake set up? How much? picturem@bellsouth.net

Responded with email
Ghost
November 5th, 2008, 11:30
Responded with email
Is it this 9"?

63-77 Lincoln, LTD, Thunderbirds had 9.375 inch centers, housings were cut away at the gasket surface for ring gear clearance, one curved rib at the front top portion of differential, strong but no gears
desertfox1023
November 5th, 2008, 12:26
Is it this 9"?

63-77 Lincoln, LTD, Thunderbirds had 9.375 inch centers, housings were cut away at the gasket surface for ring gear clearance, one curved rib at the front top portion of differential, strong but no gears

No, mine is a true 9". It's not one of those 8" hybrid axles or 9.375" center housing packed inside one.

It is a true 9" ring gear, with factory disc brakes, 31 spline shafts, big bearing, and a 5x5 bolt pattern.
desertfox1023
November 5th, 2008, 13:46
I've had some questions about parting the axle up. Sorry but I'm not willing to split the discs up and sell them separate from the axle it's self. I am willing to sell the 2.50 gear set and open carrier if any one is interested in them by themselves just make an offer.
desertfox1023
November 15th, 2008, 12:08
Still got this thing, price is negotiable, lets here some offers...
desertfox1023
November 16th, 2008, 10:00
Price drop down to 350, who wants it?
desertfox1023
November 17th, 2008, 11:09
still up for grabs
desertfox1023
November 20th, 2008, 08:00
Still sitting in the garage, No reasonable offer will be refused.
desertfox1023
November 30th, 2008, 10:15
Traded the 9" this morning for a welded 8.25 and a D30 Lock Right locker, Thanks CATMAN.
Jeepin John
November 30th, 2008, 16:41
Traded the 9" this morning for a welded 8.25 and a D30 Lock Right locker, Thanks CATMAN.

No problem Will! I hope the locker works out for ya. Your truck will be totally different locked front and rear!!
desertfox1023
December 1st, 2008, 11:14
No problem Will! I hope the locker works out for ya. Your truck will be totally different locked front and rear!!

Ya man, don't forget to post up some pics when you get the ball rolling on your build, your XJ will be sweet with that 9", rear, coils and a 4 wheel disc setup.