Jeff in VA
<---respect
- Location
- Richmond, VA
Need to convert my AX15 from internal to external slave. I've got the bellhousing, need all the rest ASAP.
TIA,
Jeff
TIA,
Jeff
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
WTB, AX15 external slave parts
- Thread starter Jeff in VA
- Start date
stoneattic
NAXJA Forum User
- Location
- Honey Brook, PA
I know your post is a bit old but...
I know in my year (95) the master cylinder, tubing and slave cylinder are sold as an assembly. I melted the plastic hose and had to buy the whole assembly. It looks like I could have made a hose to work but I was tight on time. I held onto the original master and slave cylinders if you're interested.
I know in my year (95) the master cylinder, tubing and slave cylinder are sold as an assembly. I melted the plastic hose and had to buy the whole assembly. It looks like I could have made a hose to work but I was tight on time. I held onto the original master and slave cylinders if you're interested.