WF "swap meet"

[XJ&CHZ4ME]

I am sure there are going to be a few parts getting traded around, so post up what ya got or need.

I have a set of 96-down rear tail lights
1 set of wheels off of a 98 Limited (silver tear drops)
4 factory center caps in silver that came off a 99 sport
1-33x12.50x15 mud king...it holds air but not good for much except a trail spare (free)
header panel from a 90 waggoner, trim is missing but header is in OK shape

I am sure I will be adding to this as I keep cleaning out the shop when we move to the new house.

[Rev Den]

Steering and axle shafts for a D30 disconnect axle.

Rev

[IllianaXJ]

Pair of taillights for 96-down
Front skid (no hardware)
Whole mess of 231 t'case parts... will bring for spares
84-96 4-door front half doors - $150 obo (85xjwoody currently has dibs, but if he backs out...)
Pair of D30 unit bearings off an 01. Not sure on cross-referencing what else they will fit, prob 00-01 LP30s. Good for trail spares.

[IllianaXJ]

Pair of chrome remote (cable) mirrors for 84-96. Decent shape.
Chrome D/S headlight bezel for 84-96.

[XJ&CHZ4ME]

that reminds me Byron, I have a drivers side cable driven mirror for a 84-96 in good shape.

[BOB]

I am putting new tires and wheels on my trailer this week.
I will keep one of the old ones for a spare.

the other three are up for grabs.
the good....they hold air.
the bad......the rubber is warped and they are some weird chineese brand.
15 inch rim tire size...who knows...good enough to get you to the next gas station. FREE delivery at WF only.

BOB

[seanR]

All of this stuff is still in my garage.
I can bring it to WF.
http://naxja.org/forum/showpost.php?p=244061244&postcount=1

[macgyvr]

I am sure there are going to be a few parts getting traded around, so post up what ya got or need.

I have a set of 96-down rear tail lights
1 set of wheels off of a 98 Limited (silver tear drops)
4 factory center caps in silver that came off a 99 sport
1-33x12.50x15 mud king...it holds air but not good for much except a trail spare (free)
header panel from a 90 waggoner, trim is missing but header is in OK shape

I am sure I will be adding to this as I keep cleaning out the shop when we move to the new house.

put me down for the 33in tire pls

mac 'thanks' gyvr

[ILLXJ]

My stuff is here: http://s6.photobucket.com/albums/y249/ILLXJ/FOR%20SALE/

JIM.

[XJ&CHZ4ME]

put me down for the 33in tire pls

mac 'thanks' gyvr


Mac, got ya down for a 33" spare and the gauges.

-Tyler

[XJ&CHZ4ME]

just found a single Rubicon Express lift shackle. UPS lost the other one and I forgot I had this one. Free if someone wants it. PM me if interested.

[Fore Wheeler]

I am putting new tires and wheels on my trailer this week.
I will keep one of the old ones for a spare.

the other three are up for grabs.
the good....they hold air.
the bad......the rubber is warped and they are some weird chineese brand.
15 inch rim tire size...who knows...good enough to get you to the next gas station. FREE delivery at WF only.

BOB

these gone yet? just bought a new trailer and have no spare.


also have two gauge units with tach

[BOB]

these gone yet? just bought a new trailer and have no spare.


also have two gauge units with tach

Yep, they are gone.
btw, for all you trailer guys.
etrailer.com is great to deal with.
I bought four tires and wheels.
the transaction and delivery was outstanding.
I also ordered some electrical.
the same thing.

http://www.etrailer.com/

BOB

[Fore Wheeler]

Yep, they are gone.
btw, for all you trailer guys.
etrailer.com is great to deal with.
I bought four tires and wheels.
the transaction and delivery was outstanding.
I also ordered some electrical.
the same thing.

http://www.etrailer.com/

BOB

k. thanks

[Prepmech]

I've got a HP dana 30, disco, 4.56 gears I'll haul out there if anyone is interested in it.

Also have a full roll of "protecto trim" from DPG Offroad to finish a fender trim job.

[IllianaXJ]

Pair of taillights for 96-down
Front skid (no hardware) - Claimed by FlexdXJ
Whole mess of 231 t'case parts... will bring for spares
84-96 4-door front half doors - $150 obo (85xjwoody currently has dibs, but if he backs out...)
Pair of D30 unit bearings off an 01. Not sure on cross-referencing what else they will fit, prob 00-01 LP30s. Good for trail spares.

[IllianaXJ]

Pair of taillights for 96-down - Claimed by macgyvr
Front skid (no hardware) - Claimed by FlexdXJ
Whole mess of 231 t'case parts... will bring for spares
84-96 4-door front half doors - $150 obo (85xjwoody currently has dibs, but if he backs out...)
Pair of D30 unit bearings off an 01. Not sure on cross-referencing what else they will fit, prob 00-01 LP30s. Good for trail spares.

[Roxtar]

D300 TC
http://www.naxja.org/forum/showthread.php?t=979507

Warn 8274
http://www.naxja.org/forum/showthread.php?t=979504

[XJ Stryker]

I will have a front skid for trade or sale when I head out any takers. As far as needs. Just about any steering upgrades (suspension), gas tank skid, Just make offers with trade I need alot lol. I also still have some 3 in AAL's if anyone needs those.

IT's not this one but it is identical to it.

http://i250.photobucket.com/albums/gg274/robbymac27/jeep016.jpg

[XJ Stryker]

Here is the pic of the AAL's just took them.

http://i250.photobucket.com/albums/gg274/robbymac27/Jeep006-2.jpg

http://i250.photobucket.com/albums/gg274/robbymac27/Jeep007-1.jpg

Also found a good TPS (i bought a new one that didnt fix my fault) So the old one is still good to go

http://i250.photobucket.com/albums/gg274/robbymac27/Jeep005-1.jpg

[XJ Stryker]

I promised someone on here My tan Overhead console. Can't remember who if it was you Post up or PM me.

[seanR]

I have some rear side windows.
And a Mile Marker Hydro winch.

[BRIANHO13]

I have a black roof from a 98 if anyone needs one.

[kblaze22]

How much for the AAL shipped to 60510? I have the front spings sitting here but now I need something for the rear. Let me know.

[seanR]

I have a black roof from a 98 if anyone needs one.


i would like to put the roof back on mine, maybe we can work something out....

[XJ Stryker]

I am pretty lazy about shipping, why I put them on here to swap at winterfest.

How does one even do a shipping quote?

[FlexdXJ]

I promised someone on here My tan Overhead console. Can't remember who if it was you Post up or PM me.

That was me bro! Don't remember if you wanted money for it or not! PM me and let me know:peace:

[XJ Stryker]

I will swap you it for a beer how does that sound! :cheers:

[FlexdXJ]

OK that'll work. Hows PBR sound. I'll get you a 12 pack at WF!

[XJ Stryker]

I don't need a 12 pack just one lol I am a light weight 2-3 and I am dancing naked!

[FlexdXJ]

ok 6 pack then! :D

[seanR]

I have some rear side windows.
And a Mile Marker Hydro winch.

Will trade for a fifth of Jack.

[BRIANHO13]

Will trade for a fifth of Jack.

How about a 1/5 of makers for the winch, and we can throw the windows in the fire?

[IllianaXJ]

I have some rear side windows.
And a Mile Marker Hydro winch.

Sixer for the windoze :D

[FlexdXJ]

ahhh trading booze for Jeep parts thats funny! :roflmao:

[seanR]

How about a 1/5 of makers for the winch,
Sixer for the windoze :D
Can't be Bud Lite, Minimum is Amber Bock.
Sounds like a deal to me!

[IllianaXJ]

Can't be Bud Lite, Minimum is Amber Bock.
Sounds like a deal to me!

:thumbup:

[BRIANHO13]

Can't be Bud Lite, Minimum is Amber Bock.
Sounds like a deal to me!
Sweet, I will bring the makers.

[IllianaXJ]

Add to the list: NP231 clocking ring

http://i61.photobucket.com/albums/h76/bfourman/For%20Sale/HPIM1380.jpg

[redneckguy0404]

and to think i was gonna try and save money for the swappin, beer as currency? gonna be heaven. if anyone has adjustables and DB's let me know or bring them with ya (i'm gonna get someone drunk enough to come off some LAs so watch out)

[XJ&CHZ4ME]

I have a set of D30 shafts that are now extra. Small joint drivers side and CV replacement for long shaft on the pass side. Both will get ya off the trail. PM me if interested.

[XJ&CHZ4ME]

I have a set of D30 shafts that are now extra. Small joint drivers side and CV replacement for long shaft on the pass side. Both will get ya off the trail. PM me if interested.

Spoke for as of now by SC Rednek. I will bring to WF for delivery and if the deal falls through they will be there for the gettin. Thanks Matthew!

[GoSlowGetStuck]

I didn't get in here quick enough to jump on the spare 33x12.5", anyone else happen to have one they want to get rid of (for cash even!). I still don't have one and that appears to be a NAXJA requirement. I don't really want to shell out $200+ for a new wheel+tire and I'm not seeing much on craigslist.

Suppose before that happens I need a decent rear bumper or a roof rack... So much to do before March...

[ILLXJ]

I didn't get in here quick enough to jump on the spare 33x12.5", anyone else happen to have one they want to get rid of (for cash even!). I still don't have one and that appears to be a NAXJA requirement. I don't really want to shell out $200+ for a new wheel+tire and I'm not seeing much on craigslist.

Suppose before that happens I need a decent rear bumper or a roof rack... So much to do before March...

I'll see what I can find. A friend works at a used car lot & they normally have something around. JIM.

[FlexdXJ]

I might have some 235/75 treadwright MT's(one has a plug in it) if i get some bighorns by then! I'm open for trades, looking for a gas tank skid and other armor

[XJ&CHZ4ME]

I have (4) 33x12.50x15 TSL's (bias) that are about a year old and have approx 10 wheelin trips on them. approx 85% or better tread. Was asking $525 or best offer on them, but WF09 special for NAXJA members ....$400 if prepaid for before WF and I will deliver them to WF.

[GRIMUS99XJ]

I have (4) 33x12.50x15 TSL's (bias) that are about a year old and have approx 10 wheelin trips on them. approx 85% or better tread. Was asking $525 or best offer on them, but WF09 special for NAXJA members ....$400 if prepaid for before WF and I will deliver them to WF.


Call me I think I want these

[XJ&CHZ4ME]

I have (4) 33x12.50x15 TSL's (bias) that are about a year old and have approx 10 wheelin trips on them. approx 85% or better tread. Was asking $525 or best offer on them, but WF09 special for NAXJA members ....$400 if prepaid for before WF and I will deliver them to WF.


Sale pending to GRIMUS99XJ

[XJ Stryker]

Here is the pic of the AAL's just took them.

http://i250.photobucket.com/albums/gg274/robbymac27/Jeep006-2.jpg

http://i250.photobucket.com/albums/gg274/robbymac27/Jeep007-1.jpg

Also found a good TPS (i bought a new one that didnt fix my fault) So the old one is still good to go

http://i250.photobucket.com/albums/gg274/robbymac27/Jeep005-1.jpg

I will have a front skid for trade or sale when I head out any takers. As far as needs. Just about any steering upgrades (suspension), gas tank skid, Just make offers with trade I need alot lol. I also still have some 3 in AAL's if anyone needs those.

IT's not this one but it is identical to it.

http://i250.photobucket.com/albums/gg274/robbymac27/jeep016.jpg


SOLD

[XJ Stryker]

Anyone have a starter type welder they are wanting to get rid of?

[BOB]

WTB: AX-15 and/ or NP 242.
Well...the Peugeot finally died.
time for an upgrade.
may as well upgrade the t-case as well. 1987 Jeep Comanche.

Ideally I want to match up the AX-15 to the 242.
if anyone has one or both, shoot me a PM.

thanks!

BOB

[XJ&CHZ4ME]

I have a front skid plate w/o any hardware. It is in excellent shape, I just have no use for it. If interested make me an offer. Beer is an exchangable item :cheers:

[FlexdXJ]

I have a front skid plate w/o any hardware. It is in excellent shape, I just have no use for it. If interested make me an offer. Beer is an exchangable item :cheers:


Hmm.... i was gonna buy one off of IllianaXJ but how much beer are we talking? I'm sure he can find a buyer if i can get this off of you.

[IllianaXJ]

If you're gonna stab me in the back, at least do it in a PM :D

[XJ&CHZ4ME]

I dont want any hard feelings between anyone. If you guys come to terms on something, hit me a PM

[redneckguy0404]

im going to try and hit pickapart next weekend, get some spare shafts and what not. that way if i run outta beer i can start bartering. anyone in the indy area want to go, pickapart is kinda like a grown mans playground

[FlexdXJ]

If you're gonna stab me in the back, at least do it in a PM :D

Calm down i was kidding! :D

But if i find one before WF i may pass on the one you have. I doubt i will though.

[IllianaXJ]

:thumbup:

[XJ Stryker]

Calm down i was kidding! :D

But if i find one before WF i may pass on the one you have. I doubt i will though.

Got all mine at Pull-a-part for 5-10 bucks each. Found three so far and sold the last one for 40 bucks. May have some luck there.

[XJ&CHZ4ME]

I should know more by this afternoon, but I may have another set (4) of 15x8 Soft 8's w/ 4" BS (I think) and possibly (3) 15x8 wheels of various backspacing. I am to meet the guy around noon and pick everything up. I am thinking that the wheels of various bs would make good spares. I will know more when I get them picked up. I think that a few of the spares are white wagon spoke type wheels, nothing "fancy" like soft 8's :D

If anyone has interest in these please post up. I will sell the spares cheap since I am getting them cheap. As far as the set of soft 8's, price will be determined by the condition.

Also may have an extra 33x12.50x15 spare swamper (down to wear bars, good only for a spare).

mac, you still need one of these rims for the spare I am bringing ya??

[GoSlowGetStuck]

Also may have an extra 33x12.50x15 spare swamper (down to wear bars, good only for a spare).

PMed you back about the spare, didn't see you had the extra wheels when I sent that though. Probably interested in one of those as well, let me check the backspacing on my current wheels.

[macgyvr]

I should know more by this afternoon, but I may have another set (4) of 15x8 Soft 8's w/ 4" BS (I think) and possibly (3) 15x8 wheels of various backspacing. I am to meet the guy around noon and pick everything up. I am thinking that the wheels of various bs would make good spares. I will know more when I get them picked up. I think that a few of the spares are white wagon spoke type wheels, nothing "fancy" like soft 8's :D

If anyone has interest in these please post up. I will sell the spares cheap since I am getting them cheap. As far as the set of soft 8's, price will be determined by the condition.

Also may have an extra 33x12.50x15 spare swamper (down to wear bars, good only for a spare).

mac, you still need one of these rims for the spare I am bringing ya??

yes please ref the spare rim for the spare...

also when you can with pics fire me off some so i can decide which one of those two sets i want

thanks

mac 'trailer will be full coming home' gyvr

[XJ&CHZ4ME]

PM'ed ya mac

[ceejus]

im going to try and hit pickapart next weekend, get some spare shafts and what not. that way if i run outta beer i can start bartering. anyone in the indy area want to go, pickapart is kinda like a grown mans playground

i've been wanting to get by there, but haven't had a chance too. i'm going to try to go there this coming saturday. are you talking about the one on the east side off massachusets ave.?

[XJ&CHZ4ME]

WTB some 29 spline 8.25 shafts. anyone got an extra set that is coming to WF?

[Rev Den]

Anyone want my tires?

275 65R 20

Rev

[redneckguy0404]

WTB some 29 spline 8.25 shafts. anyone got an extra set that is coming to WF?

thats what im hunting at the JY, says they want 22 bucks a shaft so im going to grab whatever they have, the more spares parts the ballzier we can get

[bmyohn]

anyone got a 35" spare?

[XJ&CHZ4ME]

PM'ed ya bmyohn

[XJ&CHZ4ME]

Ok, I have some rims that I picked up yesterday and now I have the following left overs. The 2 white spokes are 15x8 w/ 3.75 BS. Excellent shape, $20 each on those. The single black one (horrible paint job) is 15x8 w/ 4" BS for $15 (pending to macgyvr). The beadlocks are weld on kits and I have the bolts. I dont know much more about them other then what you see in the picture. The white one is 15x8 w/ 3.75 BS and the black one (another bad paint job) is 15x8 but not sure on the BS, I think it is 3.75 as well. $40 for your choice. Tires in the pics will be dismounted before WF. Wheels must be prepaid to me before WF due to the space they are going to take up in my rig. PM me if interested in any or all of the rims. Will not ship unless on buyers dime.

http://i225.photobucket.com/albums/dd143/XJ_TJ4ME/XJ%20pics/DSC01398.jpg

http://i225.photobucket.com/albums/dd143/XJ_TJ4ME/XJ%20pics/DSC01399.jpg

http://i225.photobucket.com/albums/dd143/XJ_TJ4ME/XJ%20pics/DSC01400.jpg

http://i225.photobucket.com/albums/dd143/XJ_TJ4ME/XJ%20pics/DSC01401.jpg

[redneckguy0404]

somebody just load a parts cherokee and bring up!!!!! id prefer a waggy 44 for and aft!!!!!!

[redneckguy0404]

WTB some 29 spline 8.25 shafts. anyone got an extra set that is coming to WF?

i picked up a set today, got to go back with an impact to get the wheels off to pull the ones on a 96 and see(pray) they are 29 spline. so ive got one set going with me if you break you are welcome to them but hopefully i get teh other set out.

[XJ&CHZ4ME]

awesome man, thanks.

the balck non-beadlocked wheel is now sold to macgyvr

one of the white spoked non-beadlocked wheels is sold to bmyohn as well as a 36" spare IROK

I have 2 spare 36x13.50x15 IROKS left. They are down to the wear bars or beyond, but will get ya off the trail. PM me if anyone is interested.

[GoSlowGetStuck]

awesome man, thanks.

the balck non-beadlocked wheel is now sold to macgyvr

one of the white spoked non-beadlocked wheels is sold to bmyohn as well as a 36" spare IROK

I have 2 spare 36x13.50x15 IROKS left. They are down to the wear bars or beyond, but will get ya off the trail. PM me if anyone is interested.

What about the 33x12.50x15 that you said you might have? Basically I have no spare at the moment and need one to pass tech, hoping to have a truck and trailer by then so my biggest priority is just getting off the trail if I do need to use it. If it came on a wheel that would be great, PM me a price and I will make sure to square up with you, otherwise I'm going to be hunting around for a rim, and a place in Attica to mount a tire...

[92XJT]

1 stock front bumper off my 92 - tweaked and bent -- free

35 BFG KO - like new (maybe 300 miles on tire) for 17" rim. Currently has 5x5.5 steelie on it -- $100

Good stocker rear bumper off the 92 - make offer


If I have more stuff, which I probably do I'll post it up - have pics if anyone needs em. I'll be there early saturday morning at WF. May sell my Rusty's upper control arms (believe they are for up to 5" of lift).

[XJ&CHZ4ME]

What about the 33x12.50x15 that you said you might have? Basically I have no spare at the moment and need one to pass tech, hoping to have a truck and trailer by then so my biggest priority is just getting off the trail if I do need to use it. If it came on a wheel that would be great, PM me a price and I will make sure to square up with you, otherwise I'm going to be hunting around for a rim, and a place in Attica to mount a tire...

PM'ed ya on the tire and rim combo.

[Pat]

D30 Lock-right (used): $150
Currie drag link and Goferit tie-rod: $150
Trailmaster drop brackets (reinforced): $150
Gray cloth seats out of 98 xj (f & r): $100

Would prefer to deliver all to WF.

[Fore Wheeler]

97+ np231 will trade for 2 or more cases fat tire and/or yingling.

grey over head thingy, dirty, $10

[GoSlowGetStuck]

Ok, well I am a n00b and didn't bother checking if my D35 was C-clip or not before heading to the junkyard last weekend. Pulled some C-clip axle shafts from a '93 while I was clueless that my '89 was the last year of the non C-clip D35s.

So I have two C-clip D35 shafts. Paid $40 at the JY, which seems to be the going rate for a set of shafts. So if I can get my money out of them I'd be happy, or even better if I could trade for a pair of non C-clip shafts.

[Big Hank]

Nice 2 inch receiver hitch for MJ's. Installed for less then one month. Towed one small four wheeler/golf-cart trailer. Very nice, nearly new, frame mount, NOT UNIVERSAL. Bolts to factory locations...

I would not suggest this for a trail rig unless you run the factory rear bumper. It hangs to low if you plan to run any aftermarket bumper setup.

I had it on an 88 short bed. Not sure if there are differences.

$75 takes it.

[BOB]

Rubicon Express "add a leafs" pair.
2.5" inch lift.
part # 1410
NEW....never used or installed.

$50.00 delivered at WF only

BOB

http://www.rubiconexpress.com/Jeep/XJ/Product.aspx?part=RE1410

[FlexdXJ]

97+ np231 will trade for 2 or more cases fat tire and/or yingling.

grey over head thingy, dirty, $10

Hmmm.....If i only had a place to put that t-case. I could get it and rebuild it and put a SYE on it and replace mine!:D

[FlexdXJ]

97+ np231 will trade for 2 or more cases fat tire and/or yingling.

grey over head thingy, dirty, $10


If I had a place to put that t-case I would get it off of you!

[macgyvr]

Time to spring into savings...

Rubicon Express rear TJ 4.5 inch lift springs used when I ran rear coils on the xjbuggypopcan.
product here (http://www.rubiconexpress.com/Jeep/TJ/Product.aspx?part=RE1360)
$85

Rusty's Off Road front XJ 6.5 springs used in the front of the xjbuggypopcan.
product here (http://rustysoffroad.com/mm5/merchant.mvc?Screen=PROD&Product_Code=RC-CS808-XJ&Category_Code=COILS)
$75

Both sets are in good shape and still lifted the advertised size, the Rusty's fronts probably still net a bit more than 6.5 inches. Other than normal wear (i.e. they probably could use some paint) they look like they do in the links. Can post pics this weekend if requested.

Prefer not to ship, delivery availible to winterfest. These will also be posted in the Midwest forsale forum and on another local board.

I got more stuff too, but this is a start.

mac 'bid early, bid often' gyvr

[macgyvr]

Time to spring into savings...

Rubicon Express rear TJ 4.5 inch lift springs used when I ran rear coils on the xjbuggypopcan.
product here (http://www.rubiconexpress.com/Jeep/TJ/Product.aspx?part=RE1360)
$85

Rusty's Off Road front XJ 6.5 springs used in the front of the xjbuggypopcan.
product here (http://rustysoffroad.com/mm5/merchant.mvc?Screen=PROD&Product_Code=RC-CS808-XJ&Category_Code=COILS)
$75

Both sets are in good shape and still lifted the advertised size, the Rusty's fronts probably still net a bit more than 6.5 inches. Other than normal wear (i.e. they probably could use some paint) they look like they do in the links. Can post pics this weekend if requested.

Prefer not to ship, delivery availible to winterfest. These will also be posted in the Midwest forsale forum and on another local board.

I got more stuff too, but this is a start.

mac 'bid early, bid often' gyvr

Just like that sale pending on the XJ front springs...still have the rear TJ coils

mac 'need to find more stuff to sell' gyvr

[Fore Wheeler]

If I had a place to put that t-case I would get it off of you!


how much space does a tcase take up? I've had it laying around for years and keep forgetting about it.

let me know if you find the space.

dan

[FlexdXJ]

how much space does a tcase take up? I've had it laying around for years and keep forgetting about it.

let me know if you find the space.

dan

Ok man I'll see what i can do and let you know!

[Fore Wheeler]

Ok man I'll see what i can do and let you know!

cool. i need beer more than i need this case :cheers:

[FlexdXJ]

cool. i need beer more than i need this case :cheers:

So two cases of Fat tire. I'll let you know soon. :cheers:

[FlexdXJ]

cool. i need beer more than i need this case :cheers:

Well since i'm not a drinker I have no clue where i can get yingling or Fat tire. My brother said it would be hard to find around here. Anyone know where i can get them between Columbus and Attica?

[chaz_88_MJ]

Well since i'm not a drinker I have no clue where i can get yingling or Fat tire. My brother said it would be hard to find around here. Anyone know where i can get them between Columbus and Attica?


Dont know of any places in Indiana that you can get Fat Tire and I dont think you can in Ohio either.

[FlexdXJ]

Dont know of any places in Indiana that you can get Fat Tire and I dont think you can in Ohio either.

Columbus, IN! :D

Well hell! anything else Fore Wheeler?

[Fore Wheeler]

Columbus, IN! :D

Well hell! anything else Fore Wheeler?

pm'ed ya

[FlexdXJ]

pm'ed ya

returned

[XJ&CHZ4ME]

I am already hauling out 3 cases of Fat Tire, hell, whats a few more! I can get it here in MO if ya need me to haul it out, but your gonna have to paypal for it first :D

I can also get Boulevard too, it is mighty tasty :cheers:

[FlexdXJ]

I am already hauling out 3 cases of Fat Tire, hell, whats a few more! I can get it here in MO if ya need me to haul it out, but your gonna have to paypal for it first :D

I can also get Boulevard too, it is mighty tasty :cheers:

Thanks but we got a deal worked out! :thumbup:

[mcnamaag]

Well since i'm not a drinker I have no clue where i can get yingling or Fat tire. My brother said it would be hard to find around here. Anyone know where i can get them between Columbus and Attica?

I am coming from Aberdeen MD. I can pick it up for you. The Yeng at least.

[FlexdXJ]

I am coming from Aberdeen MD. I can pick it up for you. The Yeng at least.

We got something worked out. Thanks anyways mcnamaag! :cheers:

[macgyvr]

Time to spring into savings...

Rubicon Express rear TJ 4.5 inch lift springs used when I ran rear coils on the xjbuggypopcan.
product here (http://www.rubiconexpress.com/Jeep/TJ/Product.aspx?part=RE1360)
$85

Rusty's Off Road front XJ 6.5 springs used in the front of the xjbuggypopcan.
product here (http://rustysoffroad.com/mm5/merchant.mvc?Screen=PROD&Product_Code=RC-CS808-XJ&Category_Code=COILS)
$75

Both sets are in good shape and still lifted the advertised size, the Rusty's fronts probably still net a bit more than 6.5 inches. Other than normal wear (i.e. they probably could use some paint) they look like they do in the links. Can post pics this weekend if requested.

Prefer not to ship, delivery availible to winterfest. These will also be posted in the Midwest forsale forum and on another local board.

I got more stuff too, but this is a start.

mac 'bid early, bid often' gyvr

Front XJ springs are sold!
Still have rear TJ springs.

mac 'get em while they are hot' gyvr

[IllianaXJ]

Chrome 84-96 manual mirrors. Complete with cable joystick dealie and interior trim panels. Make an offer.

[egghead]

Pat.. whats crackalackin' homey. Lock-right decent? Might be interested.



Egg


D30 Lock-right (used): $150
Currie drag link and Goferit tie-rod: $150
Trailmaster drop brackets (reinforced): $150
Gray cloth seats out of 98 xj (f & r): $100

Would prefer to deliver all to WF.

[Pat]

Yeah, it's in good shape. Never had any issues with it. It is still in the carrier at the moment...

[FlexdXJ]

Well i ordered me the H4 e-codes conversion headlights for the Jeep today. I have a set of silverstars which i am really happy with I'll take 15 bucks and deliver them to WF! I think they have been on the Jeep for about 9 months

[egghead]

hmm.. i'm interested. Bring it up to winterfest. and I'll bring cash. :looney:

[BOB]

Wilson 4' Silver Load FLEX4 Tunable CB Antenna FLEX-4
http://www.cbradiostore.com/catalog/wilson_flex_3_antenna%20copy.jpg

http://www.cbradiostore.com/servlet/the-227/flex4%2C-flex-dsh-4%2C-wilson-flex%2C/Detail

for sale $15 at WF

brand new, used once.

BOB

[99SJ_Ex]

whats a link for that conversion kit? i can't seem to find it...

[XJ&CHZ4ME]

hey FLEXEDXJ-if EGG does not take those bulbs I'll take them off your hands at WF.

BOB, I'll take that antenna off your hands as well. I'll bring the $$ to WF

Thanks
-Tyler

[BOB]

hey FLEXEDXJ-if EGG does not take those bulbs I'll take them off your hands at WF.

BOB, I'll take that antenna off your hands as well. I'll bring the $$ to WF

Thanks
-Tyler


S O L D

Thanks Tyler

BOB

[egghead]

no no. Not interested in the bulbs. Interested in Pats Locker. :cheers: Bulbs are all yours XJ&TJ4ME


Egg

[FlexdXJ]

Wilson 4' Silver Load FLEX4 Tunable CB Antenna FLEX-4
http://www.cbradiostore.com/catalog/wilson_flex_3_antenna%20copy.jpg

http://www.cbradiostore.com/servlet/the-227/flex4%2C-flex-dsh-4%2C-wilson-flex%2C/Detail

for sale $15 at WF

brand new, used once.

BOB

BOB would you consider a trade for that antenna? I have a set of silverstars i need to get rid of! They are used but they've only been on my jeep for 9 months or so.

[HaleYes]

I have a throttle body if anyone is interested. It's off of a 2000 and has all the sensors and it worked when removed 6 months ago...or there abouts. There is also a local machine shop that I can have bore it out if you're interested. They've done two for me now and do good work. It's in stock form now so speak now so I can be sure to get it back before WF.

I'm open for trades.

[99SJ_Ex]

I'd be interested in the Throttle body, how much would it be for overbore? Should work very well for my 99....

[GoSlowGetStuck]

If for some reason egghead bails on the D30 locker, I'd like to buy it.

I have a full cluster (gauges not idiot lights), plus oil pressure and coolant temp sending units out of a '90. I misunderstood the compatibility between years (n00b) and got them for my buddy's '95. Willing to trade for 91-96 cluster/senders, or sell for... I don't know, $30 OBO? No idea what it's worth, just trying to cover my junkyard expenses.

[Pat]

D30 Lock-right (used): $150
Currie drag link and Goferit tie-rod: $150
Trailmaster drop brackets (reinforced): $150
Gray cloth seats out of 98 xj (f & r): $100

Would prefer to deliver all to WF.

Egg has dibs on the locker.

Make me some offers on the other stuff.

[FlexdXJ]

whats a link for that conversion kit? i can't seem to find it...

Here's that link for ya man!

http://cgi.ebay.com/ebaymotors/79-01-JEEP-CHEROKEE-EURO-200mm-H4-H6054-HEADLIGHTS_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2 el1116QQitemZ270326225626QQptZMotorsQ5fCarQ5fTruck Q5fPartsQ5fAccessories

They are coming in tomorrow i'll let you know how they perform!

[BOB]

does anyone have any window crank handles?
84-96 will work on my 87. red if possible.
if not, I need a set (2)for my Comanche.
good condition preferred.

thanks,

BOB

[XJ&CHZ4ME]

BOB, I think I have a set of grey ones if you cant find anything else, I can also possibly get some black ones, but that may take some looking around. Either pair would be free.

[BOB]

BOB, I think I have a set of grey ones if you cant find anything else, I can also possibly get some black ones, but that may take some looking around. Either pair would be free.

either set is great. I can spray paint them, I guess.

great price too!

Thanks

BOB

[XJ&CHZ4ME]

I have a pair with your name on them BOB, I already threw them in the "Winterfest parts tote" :thumbup:

[GRIMUS99XJ]

I need a xj that is lifted locked and caged. I would be willing to trade a couple t-shirts(small cause the big ones cost to much) and maybe a hat if the body looks good. let me know so I can arrange to get the shirts.





waring: there is no guarantee that the shirts or possible hat will be rough country brand or even new for that matter.

[XJ&CHZ4ME]

I thought I had you hooked up until I re-read it and you HAVE to have a cage, sorry, I can not help ya now. Damn, I really needed those shirts too! :D You know I would look extra sexy in a small shirt ;)

[99SJ_Ex]

I need a xj that is lifted locked and caged. I would be willing to trade a couple t-shirts(small cause the big ones cost to much) and maybe a hat if the body looks good. let me know so I can arrange to get the shirts.





waring: there is no guarantee that the shirts or possible hat will be rough country brand or even new for that matter.

I'll let you use my XJ all you want if you lift and lock it!!!

Haha it was worth a try... hasta

[GRIMUS99XJ]

I thought I had you hooked up until I re-read it and you HAVE to have a cage, sorry, I can not help ya now. Damn, I really needed those shirts too! :D You know I would look extra sexy in a small shirt ;)


I can deal without the cage but I gonna have to keep my hat. And I know how bad you want the black winterfest hat from last year I read your other post begging like a school girl for one

[FlexdXJ]

I got my H4's in this morning I can feel the heat off of them from at least a foot away so i am guessing they are bright, i'll find out tonight! :D

edit: i thought i was still in the Important thread oops! Got those Silverstars all cleaned up for ya BOB! :doh:

[dozer_xj]

http://www.pirate4x4.com/forum/showthread.php?t=752432
I have all this minus the 8.25 with the powertax and plus a set of dana 35 shafts ill bring. they are for my dads jeep but ill sell them to someone if they are in a pintch to help them out. Il le at winterfest, ship or you can pic up.

[HaleYes]

I just realized that I have 2 31" mud tires. They'd be good spares. Tires only, no rims.

Also have a set of JKS quicker discos. Not sure which length they are. They should work for 4" of lift or more.

[GoSlowGetStuck]

Also have a set of JKS quicker discos. Not sure which length they are. They should work for 4" of lift or more.

Interested in these if they'll work for my amount of lift (6"). I have some bastardized homemade links from the previous owner that don't work very well and bend/snap bolts all the time.

Side note, it looks like I have sway bar drop brackets *and* long links, I only really need one or the other right?

[HaleYes]

Interested in these if they'll work for my amount of lift (6").

They'll work. Sending PM....

[BOB]

I have a Large Naxja long sleeved denim button up shirt with button down collar. I am 5'9 about 180, and it fits perfect, with some belly room.
Clean, no stains, no rips, smoke free home. Naxja logo and XJ on the left breast.

$20 delivered at WF.

BOB

[sgtmack]

I have a front hitch I can bring. I used it for a year, then built a booty fab bumper to hold the winch. If I can find which box I put them in, I might have the mounting bolts too. I would like $50.00 for it. If I can find the bolts, I'll even help put it on, if it's not raining.
To go with it, I have a 2" receiver winch mount. It's beefy. I would like $50.00 for it too.

I am also looking for a 33" spare. I have a 31", which I can use to get off the trail, but would prefer a 33".

[GoSlowGetStuck]

I have a front hitch I can bring. I used it for a year, then built a booty fab bumper to hold the winch. If I can find which box I put them in, I might have the mounting bolts too. I would like $50.00 for it. If I can find the bolts, I'll even help put it on, if it's not raining.
To go with it, I have a 2" receiver winch mount. It's beefy. I would like $50.00 for it too.

I am also looking for a 33" spare. I have a 31", which I can use to get off the trail, but would prefer a 33".

Front hitch + 2" winch mount... I need those! I can PayPal you now if you PM me your email addy, otherwise I can pay in cash at WF.


I'm going to be bankrupt after WF!

[99SJ_Ex]

Front hitch + 2" winch mount... I need those! I can PayPal you now if you PM me your email addy, otherwise I can pay in cash at WF.


I'm going to be bankrupt after WF!


I've gone beyond broke for this, but for me, its soooo worth it... I havn't done anything really fun in a looong time because of school... Its a treat I'm giving myself.

[seanR]

I've gone beyond broke for this, but for me, its soooo worth it... I havn't done anything really fun in a looong time because of school... Its a treat I'm giving myself.

Us too.
We are both unemployed, I plan on paying for registration with 'favors' to Hale, and to get back home, we plan on siphoning gas out of every ones tow rigs Saturday night.

[XJ&CHZ4ME]

Us too.
We are both unemployed, I plan on paying for registration with 'favors' to Hale, and to get back home, we plan on siphoning gas out of every ones tow rigs Saturday night.

Damn Sean, now I have to come up with a new idea for gas to get home! :D I am selling about every extra part to make $$$ for this trip, good thing mac "still buying sh*t like it is going out of style" gyvr is still employeed, he is financing most of my trip :D

[HaleYes]

Us too.
We are both unemployed, I plan on paying for registration with 'favors' to Hale, and to get back home, we plan on siphoning gas out of every ones tow rigs Saturday night.


Send Lar to do the talking and you might have a deal.:D

[sgtmack]

I'll throw them in the Jeep for you Brad. The front hitch makes one heck of a tow point.

I also found my 3" front coils. They were still holding at that when I took them off. I don't remember what brand they are. They are black. And not Rusty's. If some one wants them, make me an offer.

[GoSlowGetStuck]

I'll throw them in the Jeep for you Brad. The front hitch makes one heck of a tow point.

Good deal, I've been debating between front bumper vs. front receiver vs. tow hooks and this makes the decision for me. Let me know if you find the hardware, I'll need to get it put on to pass tech on Saturday.

[IllianaXJ]

Front skid back up for sale. No hardware. Fire sale price $30.

4-bolt YJ steering box - $50

NIB M.O.R.E. Steering Brace - $65

[IllianaXJ]

Front skid back up for sale. No hardware. Fire sale price $30. - SOLD

4-bolt YJ steering box - $50

NIB M.O.R.E. Steering Brace - $65

[XJosh95]

Did someone say they had a high lift? I'd be interested.

[Sponge Bob]

i have 4 mix match aluminum cherokee rims that i could bring also a 33 all terrain tire :wave1:

[BOB]

I just ordered some shocks from "ROUGH COUNTRY".
If I get them on time and installed befoe WF, I will have four
Skyjacker used shocks (about two years old).
they are 18" in the rear and 21" in the front at ride height.

let me know if anyone needs them.

FREEBIES

BOB

[mcnamaag]

I'll throw them in the Jeep for you Brad. The front hitch makes one heck of a tow point.

I also found my 3" front coils. They were still holding at that when I took them off. I don't remember what brand they are. They are black. And not Rusty's. If some one wants them, make me an offer.

How about 10.00 and a six pack? If so I will take them.

[Rev Den]

Hey Bob.

How much lift is that?

If it is 4" I'll take um.

Rev

[BOB]

Hey Bob.

How much lift is that?

If it is 4" I'll take um.

Rev

they're yours!

BOB

[mcnamaag]

I have a like new Optima Blue top for sale. Approx 6 months old. Holds a charge and works like new. I got two of them in a packedge deal and only need one. Retail for 249.00 looking to trade or sell make an offer.

[FlexdXJ]

I have a like new Optima Blue top for sale. Approx 6 months old. Holds a charge and works like new. I got two of them in a packedge deal and only need one. Retail for 249.00 looking to trade or sell make an offer.

If it was a Red top and you took beer for a trade i'd be all over it! :D

[85xjwoody]

Just went through the storage unit.

Lots of 84-96 passenger side taillights. $5.00 each

Intake from an 89 4.0 $10.00

Tranny/tranfer case from an 86 cherokee: TF904 3speed auto, 229 NP229 $75.oo for both or $50.00 each.

87 wagoneer headlight bezels. $15.00

Tube doors that fit a four door cherokee 84-96. Bolt right up, just have to build something for the slide pin go in to keep them closed. $75.00
http://i272.photobucket.com/albums/jj182/xjwoody/100_0628-1.jpg?t=1235069740

I have a c8.25 29 spline. It has 1"lift 7"long spring perches, shock mounts cut off, bad pinion bearings. $50.00 Or if the shafts are needed they can be taken out and the rest of the axle junked.

Set of white mirrors to fit 84-96 cherokee. $20.00

1991 comanche rear glass. $10.00

Gray leather back seat with back to fit 84-96 cherokee. $20.00

Underhood light from an 89 wagoneer. Free

Gray fender trim from a 96 cherokee. Free

Hopefully some of this can go to winterfest. I need some more room in my storage unit:D

Kim

[XJ Stryker]

Underhood light from an 89 wagoneer. Free




Mark me down for it My other jeeps light don't work no more.

[mcnamaag]

If it was a Red top and you took beer for a trade i'd be all over it! :D

I think the Blue top is a MUCH better battery in offroad and daily driver applications. I have one in mine (a DD) and love it. IMHO

[FlexdXJ]

I think the Blue top is a MUCH better battery in offroad and daily driver applications. I have one in mine (a DD) and love it. IMHO

Hmmmm.... what are you asking for it?

[XJ&CHZ4ME]

what do you need as far as trade items etc? how much if cash is talking??

I need it for my boat :D

[XJ&CHZ4ME]

Just went through the storage unit.

Lots of 84-96 passenger side taillights. $5.00 each

Intake from an 89 4.0 $10.00

Tranny/tranfer case from an 86 cherokee: TF904 3speed auto, 229 NP229 $75.oo for both or $50.00 each.

87 wagoneer headlight bezels. $15.00

Tube doors that fit a four door cherokee 84-96. Bolt right up, just have to build something for the slide pin go in to keep them closed. $75.00
http://i272.photobucket.com/albums/jj182/xjwoody/100_0628-1.jpg?t=1235069740

I have a c8.25 29 spline. It has 1"lift 7"long spring perches, shock mounts cut off, bad pinion bearings. $50.00 Or if the shafts are needed they can be taken out and the rest of the axle junked.

Set of white mirrors to fit 84-96 cherokee. $20.00

1991 comanche rear glass. $10.00

Gray leather back seat with back to fit 84-96 cherokee. $20.00

Underhood light from an 89 wagoneer. Free

Gray fender trim from a 96 cherokee. Free

Hopefully some of this can go to winterfest. I need some more room in my storage unit:D

Kim

Kim,

I'll take the 29 spline shafts. I dont need the diff, but would like the spider gears and carrier as well. I can paypal you or we can settle up at WF. Let me know.

thanks man,
Tyler

[85xjwoody]

Kim,

I'll take the 29 spline shafts. I dont need the diff, but would like the spider gears and carrier as well. I can paypal you or we can settle up at WF. Let me know.

thanks man,
Tyler

Shafts, gears(3.55), and carrier are yours. We can settle up at winterfest. :cheers:

[85xjwoody]

Mark me down for it My other jeeps light don't work no more.


Light is yours.

[85xjwoody]

Just went through the storage unit.

Lots of 84-96 passenger side taillights. $5.00 each

Intake from an 89 4.0 $10.00

Tranny/tranfer case from an 86 cherokee: TF904 3speed auto, 229 NP229 $75.oo for both or $50.00 each.

87 wagoneer headlight bezels. $15.00

Tube doors that fit a four door cherokee 84-96. Bolt right up, just have to build something for the slide pin go in to keep them closed. $75.00

Set of white mirrors to fit 84-96 cherokee. $20.00

1991 comanche rear glass. $10.00

Gray leather back seat with back to fit 84-96 cherokee. $20.00

Gray fender trim from a 96 cherokee. Free

Hopefully some of this can go to winterfest. I need some more room in my storage unit:D

Kim

updated list.

[GoSlowGetStuck]

My buddy just bought an XJ and it came with four extra wheels/tires that he doesn't want. They are on stock '95 Cherokee wheels, look like they're in OK shape as far as paint, one of the plastic center things is cracked and has a piece missing. 3 brands of tires, not a whole lot of tread on any of them. Maybe somebody wants the wheels? He owes me money so I want them gone. :) I will throw out $50 as a possibly obnoxious price for all four, but please just make me an offer and I'll probably go with it.

http://i307.photobucket.com/albums/nn316/technicallyaccurate/Random/IMG_1890.jpg

[cardboard]

What size are those tires, And what kinsa shape are they in.

[Fore Wheeler]

My buddy just bought an XJ and it came with four extra wheels/tires that he doesn't want. They are on stock '95 Cherokee wheels, look like they're in OK shape as far as paint, one of the plastic center things is cracked and has a piece missing. 3 brands of tires, not a whole lot of tread on any of them. Maybe somebody wants the wheels? He owes me money so I want them gone. :) I will throw out $50 as a possibly obnoxious price for all four, but please just make me an offer and I'll probably go with it.

]


I'll give you $10 for the best one. my son needs a spare for his ranger.


that is if you end up splitting them.


dan

[bmyohn]

I have ONE practicly brand new Goodyear Wrangler RT/S - 225/75/R15 (stock size) - $50 bucks

mounted on wheel balanced, ready to roll (no pun intended)


http://i131.photobucket.com/albums/p307/bmyohn/100_2171.jpg

http://i131.photobucket.com/albums/p307/bmyohn/100_2173.jpg

[mcnamaag]

Hmmmm.... what are you asking for it?


I would like to get 125.00 But it IS neg. Maybe trade for some sway bar QD or gas tank skid and some Diff covers 30-44. Let me know what you got.

[seanR]

http://i131.photobucket.com/albums/p307/bmyohn/100_2173.jpg

How much for the penny, I'll give you a dime for it.

[GoSlowGetStuck]

What size are those tires, And what kinsa shape are they in.

235/70R15

They are all very low on tread. One of the Uniroyals and the Mastercraft have enough tread to be useful as a spare. The guy my buddy bought the XJ from said he had them out in his barn for a year and they were still holding air pressure. So the rims themselves might be useful for someone who wants an extra set. I can't dismount the tires from the rims because a) I don't have the equipment, b) I'm lazy and 3) I don't want to pay someone to do it.

I'll give you $10 for the best one. my son needs a spare for his ranger.

Unless anyone opts to buy the whole set, I will bring one for you.

[cardboard]

OK, now that I know I am at least going to WF for sure, I have a few things I could bring with me to make money for new projects.
I have a Rusty's air intake, with a 4.5" K&N cone style filter. This is clean and freshly oiled ready for the new owner. I also have the clean and oil kit from K&N that will go with this.
$30.00

I also have a 5" True Flow Cone filter by itself. It has also been cleaned. This is a foam style filter with a metal cage around it.
I'd like $15.00 for this.

I have 2 almost new ( less than 500 miles ) BFG 33x950x15 tires. They are not mounted and can be sold as a pair or as singles for spares. These would make great spares for your roof top carrier because they are so narrow to help keep the center of gravity down.
I'd like $90.00 for the pair or $ 50.00 a peice

I also have 1 Super Swamper SSR 33x12.50x15 that is mounted on a black D window 15 x 8 wheel. This tire has at least 50% tread on it if not better, there are no gouges and holds air just fine.
This one will be $50.00

I have a new spool of 5/16ths winch cable. At best I can measure, it has about 75 ft on the spool. It has never been mounted yet.
Id like $25.00 for this.

I also have a metal ammo box that measures 18"x 15"x 19". This box has a locking lid and has fairly good paint on it. This was on my trailer when I bought and was used as storage box. I have since removed it and got a larger box cause I obviuosly carry more stuff.
This will be $15.00
All of this can be delivered to WF on Sat. and I will probably find more. Thanx for looking Cardboard

[Bloose]

Here is a list of stuff I have and can bring along to WF if anyone is interested. This of course will eliminate shipping fee's.

NVG242 W/Tom Woods SYE and Driveshaft.

This SYE has a unique rear seal housing. This is because the ones for the '97 and newer usually leak. After several tries with the standard style Tom sent me the style I have now. It uses two seals in the seal house and has never leaked.

The unit is in good shape and was recently installed. It has about 60,000 miles on it. I went with a NVG241 4:1 which is why this is for sale. The only thing it needs is a 1310 front yoke. The current yoke is the 1330 from the 241 I installed. Price is $450 for case and driveshaft.

1998 Chrysler 8.25 29 spline w/ARB.

Everything works great. Backing plates are included but you must exchange all brake hardware with your current axle. Included with the axle are 2 spare shafts (both sides are the same length) and a spare housing if desired. Price is $650

Rusty's HD trackbar

Have the bracket too but I used it for a tire chock for my bus and it bent. Can be easily straightened though. Also the lower bushing is a little damaged from tightening but it is still rattle free. This set up will work with 3 1/2" lift and possibly to 4 1/2. Price is $25

Rusty's HD cross member.

This is actually a nice piece. $50

Rusty's Tcase skid.

Not as nice as the crossmember but it does work. It is bent up a bit but it should work with a small amount of tweaking. Price is $20

[FlexdXJ]

Here is a list of stuff I have and can bring along to WF if anyone is interested. This of course will eliminate shipping fee's.

NVG242 W/Tom Woods SYE and Driveshaft.

This SYE has a unique rear seal housing. This is because the ones for the '97 and newer usually leak. After several tries with the standard style Tom sent me the style I have now. It uses two seals in the seal house and has never leaked.

The unit is in good shape and was recently installed. It has about 60,000 miles on it. I went with a NVG241 4:1 which is why this is for sale. The only thing it needs is a 1310 front yoke. The current yoke is the 1330 from the 241 I installed. Price is $450 for case and driveshaft.

1998 Chrysler 8.25 29 spline w/ARB.

Everything works great. Backing plates are included but you must exchange all brake hardware with your current axle. Included with the axle are 2 spare shafts (both sides are the same length) and a spare housing if desired. Price is $650

Rusty's HD trackbar

Have the bracket too but I used it for a tire chock for my bus and it bent. Can be easily straightened though. Also the lower bushing is a little damaged from tightening but it is still rattle free. This set up will work with 3 1/2" lift and possibly to 4 1/2. Price is $25

Rusty's HD cross member.

This is actually a nice piece. $50

Rusty's Tcase skid.

Not as nice as the crossmember but it does work. It is bent up a bit but it should work with a small amount of tweaking. Price is $20

Hey man i'll take that t-case skid off your hands!

[cardboard]

I also have a metal ammo box that measures 18"x 15"x 19". This box has a locking lid and has fairly good paint on it. This was on my trailer when I bought and was used as storage box. I have since removed it and got a larger box cause I obviuosly carry more stuff.
This will be $15.00
All of this can be delivered to WF on Sat. and I will probably find more. Thanx for looking Cardboard[/QUOTE]
Correction on the size of the Ammo box, it is 18"x 9"x19" roughly. Sorry bout that, Cardboard
Also ssr 33x1250 15has been spoken for. Thanx SC

[Bloose]

Here is a list of stuff I have and can bring along to WF if anyone is interested. This of course will eliminate shipping fee's.

NVG242 W/Tom Woods SYE and Driveshaft.

This SYE has a unique rear seal housing. This is because the ones for the '97 and newer usually leak. After several tries with the standard style Tom sent me the style I have now. It uses two seals in the seal house and has never leaked.

The unit is in good shape and was recently installed. It has about 60,000 miles on it. I went with a NVG241 4:1 which is why this is for sale. The only thing it needs is a 1310 front yoke. The current yoke is the 1330 from the 241 I installed. Price is $450 for case and driveshaft.

1998 Chrysler 8.25 29 spline w/ARB.

Everything works great. Backing plates are included but you must exchange all brake hardware with your current axle. Included with the axle are 2 spare shafts (both sides are the same length) and a spare housing if desired. Price is $650

P.S. Gears are 4.56 and it includes a nice HD skid to keep that lower lip from getting caught on stuff.

Rusty's HD trackbar

Have the bracket too but I used it for a tire chock for my bus and it bent. Can be easily straightened though. Also the lower bushing is a little damaged from tightening but it is still rattle free. This set up will work with 3 1/2" lift and possibly to 4 1/2. Price is $25 Sold

Rusty's HD cross member.

This is actually a nice piece. $50

Rusty's Tcase skid.

Not as nice as the crossmember but it does work. It is bent up a bit but it should work with a small amount of tweaking. Price is $20Sold

[XJ_ranger]

Here is a list of stuff I have and can bring along to WF if anyone is interested. This of course will eliminate shipping fee's.


Can i get an used ring and pinion for a d30?

the one that was in your rig during this shot - please... :D
http://www.opiebennett.com/images/Jeep/Winterfest20063406/img_4741.jpg

[IllianaXJ]

Here is a list of stuff I have and can bring along to WF if anyone is interested. This of course will eliminate shipping fee's.

NVG242 W/Tom Woods SYE and Driveshaft.

This SYE has a unique rear seal housing. This is because the ones for the '97 and newer usually leak. After several tries with the standard style Tom sent me the style I have now. It uses two seals in the seal house and has never leaked.

The unit is in good shape and was recently installed. It has about 60,000 miles on it. I went with a NVG241 4:1 which is why this is for sale. The only thing it needs is a 1310 front yoke. The current yoke is the 1330 from the 241 I installed. Price is $450 for case and driveshaft.



If I hadn't just installed a TeraLow I'd be all over this.

[Big Hank]

Nice 2 inch receiver hitch for MJ's. Installed for less then one month. Towed one small four wheeler/golf-cart trailer. Very nice, nearly new, frame mount, NOT UNIVERSAL. Bolts to factory locations...

I would not suggest this for a trail rig unless you run the factory rear bumper. It hangs to low if you plan to run any aftermarket bumper setup.

I had it on an 88 short bed. Not sure if there are differences.

$75 takes it.

ADJUSTED PRICE $50............ This is a nice hitch people..

XJ GUYS buy this and you will have the perfect excuse to buy an MJ

[Pat]

Currie drag link and Goferit tie-rod: $150
Trailmaster drop brackets (reinforced): $150
Gray cloth seats out of 98 xj (f & r): $100

Would prefer to deliver all to WF.

Make me some offers on this stuff. Need to get rid of them and I like the cashish.

Also have some Rusty's 4.5" coils that Egg has currently claimed. Will be available if he doesn't take them.

P 'bringing it all but the seats, unless you tell me you want them' Main

[BRIANHO13]

I have a rusty's steering box brace. Make me an offer.

[cardboard]

Brian whats it gonna take to relieve you of that steering brace. What kinda conditioin is it in, I mean is it at least straight and installable at WF in the parking lot.
Cardboard

[BRIANHO13]

pm sent

[85xjwoody]

Would anyone happen to have a 4.10 ring and pinion for a d30 they could part with and bring with to Winterfest?

[Rev Den]

Would anyone happen to have a 4.10 ring and pinion for a d30 they could part with and bring with to Winterfest?

Yup.

With bearings.

Do you need the cover also?

Rev

[85xjwoody]

Thanks Rev. Looking for the extra gears incase I pull a Bloose out on the trails. If I don't use them at Winterfest, they will be going in the woody.

PM sent.

[85xjwoody]

Lots of 84-96 passenger side taillights. $5.00 each

Intake from an 89 4.0 $10.00

Tranny/tranfer case from an 86 cherokee: TF904 3speed auto, 229 NP229 $75.oo for both or $50.00 each.

87 wagoneer headlight bezels. $10.00

Tube doors that fit a four door cherokee 84-96. Bolt right up, just have to build something for the slide pin go in to keep them closed. $50.00

Set of white mirrors to fit 84-96 cherokee. $20.00

1991 comanche rear glass. $10.00

Gray leather back seat with back to fit 84-96 cherokee. $20.00

Gray fender trim from a 96 cherokee. Free


Make me an offer on this crap.

[GRIMUS99XJ]

brand new winch cable 100' without hook. It came off of a miler marker 9000lb winch. never used brand new

45.00 or highest offer. Dont be shy to make offers its all good

[jessejeepin]

Surco Roof Rack with spare tire mount and light tabs. Includes two sets of rain gutter mounts, one set still in box. - $150 Make an offer.

[SC Rednek]

I got some stock leaf spring shackles from a '99, good bushings, slightly rusted, just need repainted. I have some left over trim panels too, side panels from the trunk, and center dash panel. PM me if you want them, will trade any for a couple beers

[85xjwoody]

Anyone have an extra d30 yoke? I could use one.

[cardboard]

I have one I will throw in the box for ya.

[85xjwoody]

I have one I will throw in the box for ya.

Thanks!

[sgtmack]

How about 10.00 and a six pack? If so I will take them.

Sorry, missed it the first time through. As long as it isn't light beer, it's a deal.:thumbup:

Also, I know there were a couple listed, but I can't keep track of what went where. I'm looking for a 33" spare. Any one have one left?

[GoSlowGetStuck]

I know this is the swap meet thread and people are generally offering items instead of requesting them, but...

My buddy is bringing his stocker and needs some front tow points, anyone have a set of OEM tow hooks lying around? Or even just one? Or potential alternatives?

Kinda late in the game, I know, it slipped both of our minds.

[macgyvr]

NEED:

33x12.5x15 MTs...4 of them...thought I had a set coming but was advised that they were sold...my second wheeler needs some new bigger shoes...

Let me know can pick up at winterfest...

mac 'baby jeep lovin' gyvr

[HaleYes]

I know this is the swap meet thread and people are generally offering items instead of requesting them, but...

My buddy is bringing his stocker and needs some front tow points, anyone have a set of OEM tow hooks lying around? Or even just one? Or potential alternatives?

Kinda late in the game, I know, it slipped both of our minds.

Remember, you must have adequate front and rear tow points to pass tech. inspection and wheel with the rest of our group.

:wave:

[XJ Stryker]

I know this is the swap meet thread and people are generally offering items instead of requesting them, but...

My buddy is bringing his stocker and needs some front tow points, anyone have a set of OEM tow hooks lying around? Or even just one? Or potential alternatives?

Kinda late in the game, I know, it slipped both of our minds.


I guess this guy will be last year's mcnamaag! :laugh2:

Who unfortunatley will not be able to make it. :tears:

[GoSlowGetStuck]

Remember, you must have adequate front and rear tow points to pass tech. inspection and wheel with the rest of our group.

:wave:

Unfortunately I was too busy making sure that *I'll* have the appropriate tow points that I forgot about him. Just got word that he picked up some front tow hooks so he should be good there.

Also he has a 1" rear hitch receiver, I've pulled him out with it a few times but will tech consider that "adequate"?

[XJ Stryker]

There is a Pull-a-part on my way out of Ky. I will take a quick look and see if there are any Tow Hook Brackets on the XJ's there.

That is the best I can do for ya!

EDIT: Scrap that I will have my son with me and they won't let him in there since he is 11

[XJ&CHZ4ME]

Anyone have an extra d30 yoke? I could use one.


I already have 3-4 of them loaded in the "box-o-parts"

you welcome to one if ya still need it. Got bunches of straps and bolts for them too.

[XJ&CHZ4ME]

NEED:

33x12.5x15 MTs...4 of them...thought I had a set coming but was advised that they were sold...my second wheeler needs some new bigger shoes...

Let me know can pick up at winterfest...

mac 'baby jeep lovin' gyvr

Mac,
I got a call in for ya to a friend that is parting out his rig and it has some 33's on it. He is gonna call me back in a bit with a price. IIRC they are well better then half tread.

Peas OUT!
-Tyler

[99SJ_Ex]

jessejeepin shot ya a PM on roof rack...

[XJ Stryker]

jessejeepin shot ya a PM on roof rack...

Damn I was just trying to figure out if I could afford to get it off of him.

[redneckguy0404]

Damn I was just trying to figure out if I could afford to get it off of him.

exactly what i was doing. i'll just convince myself i dont want one because it'll hurt my milage

[GoSlowGetStuck]

There is a Pull-a-part on my way out of Ky. I will take a quick look and see if there are any Tow Hook Brackets on the XJ's there.

That is the best I can do for ya!

EDIT: Scrap that I will have my son with me and they won't let him in there since he is 11

No worries, my friend said he bought some somewhere... hopefully they will get him by for this trip and by next year he'll be much more prepared.

[XJ Stryker]

I have one of those old XJ pod, ya know the rear speakers that attach to the roof.

Make offer!

[99SJ_Ex]

Damn I was just trying to figure out if I could afford to get it off of him.

Im a poor college kid simply getting some info on it and giving an offer, everyone else is free to make offers if they want....

[Rev Den]

Also he has a 1" rear hitch receiver, I've pulled him out with it a few times but will tech consider that "adequate"?

Just.


Rev

[cardboard]

I have a Jeep Liberty light bar for a Renegade. It is just the light bar, no wiring or hardware. My daughter would like $75.00 for it.
http://http://img.photobucket.com/albums/v309/digger4u/th_danislight3.jpg (http://smg.photobucket.com/albums/v309/digger4u/?action=view&current=danislight3.jpg)

[macgyvr]

Mac,
I got a call in for ya to a friend that is parting out his rig and it has some 33's on it. He is gonna call me back in a bit with a price. IIRC they are well better then half tread.

Peas OUT!
-Tyler

let me know please. thanks
mac 'send me a PM if you come up with something' gyvr

[XJ&CHZ4ME]

sorry I did not Pm ya yesterday, he sold the tires already...

sounds familiar huh? :D

[macgyvr]

sorry I did not Pm ya yesterday, he sold the tires already...

sounds familiar huh? :D

too...

mac 'will find a deal somewhere' gyvr

[XJ Stryker]

FLEX this is the Overhead Console

It is now in the truck lol

http://i250.photobucket.com/albums/gg274/robbymac27/crap003.jpg

Don't think i actually owe anyone anything else???

[FlexdXJ]

FLEX this is the Overhead Console

It is now in the truck lol

http://i250.photobucket.com/albums/gg274/robbymac27/crap003.jpg

Don't think i actually owe anyone anything else???

Thanks Stryker. It looks like it will match my TOE UP headliner!

[1995sport]

I have a Jeep Liberty light bar for a Renegade. It is just the light bar, no wiring or hardware. My daughter would like $75.00 for it.
http:// (http://%5BURL=http://smg.photobucket.com/albums/v309/digger4u/?action=view&current=danislight3.jpg%5D%5BIMG%5Dhttp://img.photobucket.com/albums/v309/digger4u/th_danislight3.jpg%5B/IMG%5D%5B/URL%5D)http://img.photobucket.com/albums/v309/digger4u/th_danislight3.jpg (http://smg.photobucket.com/albums/v309/digger4u/?action=view&current=danislight3.jpg)


I'll take the lightbar cardboard, pm'd you.