• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

vacuum lines for 4wd, which is which!

tonexj

NAXJA Forum User
Location
windsor, ca
so i got vacuum line for extending my lines from the frame to the vacuum motor on the axle in my 89'. im unsure of which ones go to which port on the vacuum dealio, there's three lines, can anyone shed any light, cant find my chilton
 
I didn't extend em, just bent the hardlines down a bit from the frame... I suppose that doesn't do you much good at this point, huh...

I'm not sure how you got the lines confused. Two of the lines share a plug, which goes in the back of the housing.

The other, single line goes into the side.

Even if you cut the fittings off, there should be enough of a stub to match the colors up.

I'll go check mine with a flashlight later...

Robert
 
Okay, the one on the side is green. On the top/back, the yellow is outboard, and the white is inboard.

Zat help?

Robert
 
2rzp7qs.jpg
 
Back
Top