vegeta
NAXJA Forum User
- Location
- ashland,kentucky
I've got a 93 country that I'm trying to start. I just swapped in my stroker and need to break it in but I'm not getting any fuel. The pump will hum for a second then stop. I jumped the wire on the ballast resistor staight from the battery and the pump works ,so I know the pump works but after that I'm lost. Even when it was jumped it showed only about 4 pounds pressure though. I've swapped relays around and checked the fuses in the pdc and they all seem fine. I know there are fuses in the cabin that are missing but I don't think they have anything to do with the pump. I know this jeep ran in 05 on the original motor because we drove it on to the trailer. I searched here and treid a few things like disconecting the tps but nothing. also the battery is brand new and fully charged(I checked it) oth the ground on the drivers side and the grounds bolted to the stud on the passenger side of the block are fine too. I'd sure appreciate any help.