Steering knuckle info

[falcon556]

I am selling a pair of knuckles that came off a 96XJ D30.
I need to know what other years they fit so that I can advertise them and take advantage of the fact that many Cherokees and Grand Cherokees use them.
I believe that they should fit at least 91-01 XJ, but I'm not sure.
TIA.

[CanMan]

I am selling a pair of knuckles that came off a 96XJ D30.
I need to know what other years they fit so that I can advertise them and take advantage of the fact that many Cherokees and Grand Cherokees use them.
I believe that they should fit at least 91-01 XJ, but I'm not sure.
TIA.

95 and up XJ. They should fit ZJ's and TJ's too.

[EricT]

http://www.naxja.org/forum/showthread.php?t=96748

[Jeep914x4]

Does anybody know if these 96 knuckles will be a direct swap onto a 91 cherokee?

12 guage says 95 and up and the other link doesn't help much.

TIA

[CanMan]

Does anybody know if these 96 knuckles will be a direct swap onto a 91 cherokee?

12 guage says 95 and up and the other link doesn't help much.

TIA

I believe the hat depth on the rotor is different on a 91 than a 96.

[falcon556]

I went to car-part.com and made searches for a '91 XJ.
I searched for both disc rotor and knuckle.
In both cases it showed compatibility all the way to '01.

[CanMan]

I went to car-part.com and made searches for a '91 XJ.
I searched for both disc rotor and knuckle.
In both cases it showed compatibility all the way to '01.

Sweet. I was thinking about the hub assembly. :doh:

[Jeep914x4]

The knuckles for a 96 will fit a 91. Bought some used and they fit fine.

[Kittrell]

Correct, There are only TWO kinds of knuckles on the XJ d30. One piece and two piece.

[Menzenski]

Sweet. I was thinking about the hub assembly. :doh:
The hub assembly is the same from 90 to 99, I think. The stock hubs on my 90 fit just fine on my 94 D30.