HBDBRacing
NAXJA Forum User
- Location
- Phoenix Az
OK So I have a 8.35 rear and a Dana 30 front. Now by using the S/N how do I determine the gear ratios?
It is not in my manual
Thanks
Adam
It is not in my manual
Thanks
Adam
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Gear ratio
- Thread starter HBDBRacing
- Start date
5-90
NAXJA Forum User
- Location
- Hammerspace
It won't be.
Check under the heads of the screws holding the covers on - the ratio should be there.
Typical ratios for the I6-equipped XJ are 3.07 for the manual transmission, and 3.55 for the AW4 auto. The 3.55 gears are more closely matched to the AW4 than the 3.07s to the BA-10/AX-15, let me tell you...
Check under the heads of the screws holding the covers on - the ratio should be there.
Typical ratios for the I6-equipped XJ are 3.07 for the manual transmission, and 3.55 for the AW4 auto. The 3.55 gears are more closely matched to the AW4 than the 3.07s to the BA-10/AX-15, let me tell you...
HBDBRacing
NAXJA Forum User
- Location
- Phoenix Az
So I did look alittle closer to the front diff and yes on that tag says 3.55
So will the 8.25 match the D30?
So will the 8.25 match the D30?
poorboy_616
NAXJA Forum User
- Location
- Vancouver, WA
Both should be matched, unless someone has molested one or the other...
Oh, and I too can attest to the 3.07 not being well suited to the AW4. My 87 had a Pukegoat BA10/5 in it's earlier life with the forest service.
The AW4 struggles with the tall ratio on hills. I wouldn't even think about towing with mine until I regear.......
Oh, and I too can attest to the 3.07 not being well suited to the AW4. My 87 had a Pukegoat BA10/5 in it's earlier life with the forest service.
The AW4 struggles with the tall ratio on hills. I wouldn't even think about towing with mine until I regear.......
