Throttle Body Spacer

[BBeach]

Hey does anyone know the dimensions of the spacers as far as to lift the linkage. Basically the 3 cylindrical lifters for the cables. I know they'll be 1 inch tall, but im unsure of the width of the spacers, the gojeep site shows the bolt size "((3) 6mm x 40mm for your bracket spacers)" but not the cylinder itself. If anyone knows these off the top of their head thatd be great.

[j99xj]

I just used two 1/2 inch thick nuts to serve as thick washers. And then used 1 inch longer bolts. Works fine and doesn't look bad at all.

[Tim_MN]

I made 1" spacers for the linkage out of 5/8" round stock to match the 1" TB spacer I made. Works great.