XJ stuff you need.....

[sidriptide]

Rusty's (i think) front tow hook brackets and hooks. new, never installed. $65

greasable, extended rear shackles, Warrior Products i think, 6.25" on-center, lightly-used look new. $40

tubular LCAs, not sure what mfg, they have a slight "bend" built into them. used but not damaged. greasable poly bushings. $40

Terra-Flex front 2" poly coil spacers, $20

97+ (will fit other years by drilling new holes) transfer case/belly skid, Skidrow i think, full width frame rail to rail, reinforced with tubing to resist flexing. 3/16 plate, $40

stock front skid plate, no damage, $40

HI-Lift mount, 1 3/4" tube with brackets that mount across the shoulder area of the rear seat, it shares the mounting screws that hold the rear seat-back retaining brackets to the bulkhead.. simple deal with 2 bolts welded to it to hold a 48" Hi-Lift. $25

3 spare rear d/shafts with slip-yokes. 29.5", 30.5" and 36" on-center, $15 ea.

set of OEM hitch/skid plate nut-strip frame inserts, brand new, $35

pretty firm on these reasonable prices.
i can get pics up this weekend.

[Hammered]

DIBS DIBS DIBS !!!!!!!!!!!!!!!! PM SENT


greasable, extended rear shackles, Warrior Products i think, 6.25" on-center, lightly-used look new. $40

Terra-Flex front 2" poly coil spacers, $20

[ROBZ95Xj]

Rusty's (i think) front tow hook brackets and hooks. new, never installed. $65

greasable, extended rear shackles, Warrior Products i think, 6.25" on-center, lightly-used look new. $40

tubular LCAs, not sure what mfg, they have a slight "bend" built into them. used but not damaged. greasable poly bushings. $40

Terra-Flex front 2" poly coil spacers, $20

97+ (will fit other years by drilling new holes) transfer case/belly skid, Skidrow i think, full width frame rail to rail, reinforced with tubing to resist flexing. 3/16 plate, $40

stock front skid plate, no damage, $40

HI-Lift mount, 1 3/4" tube with brackets that mount across the shoulder area of the rear seat, it shares the mounting screws that hold the rear seat-back retaining brackets to the bulkhead.. simple deal with 2 bolts welded to it to hold a 48" Hi-Lift. $25

3 spare rear d/shafts with slip-yokes. 29.5", 30.5" and 36" on-center, $15 ea.

set of OEM hitch/skid plate nut-strip frame inserts, brand new, $35

pretty firm on these reasonable prices.
i can get pics up this weekend.
interested i tcase skid, u think it will work with my clayton setup?

[asp]

lca's! me want! what part of western mass are you in? i live in amherst and work in no-ho. i'll pay cash, full price.

[sidriptide]

lca's! me want! what part of western mass are you in? i live in amherst and work in no-ho. i'll pay cash, full price.

my shop is in westfield.. you have a PM..

[sidriptide]

interested i tcase skid, u think it will work with my clayton setup?

i'm sure it will, its supposed to sit flush with the rear edge of the crossmember.. i checked it on the clayton setup in my white one and aside from drilling a few holes in the frame i was going to add a small tab of angle-iron in the center of the clayton x-member to support the center of it.

[sidriptide]

shackles, spacers, LCAs, and skid are sold....

[xtrememtbiker85]

never mind.

[sidriptide]

never mind.


:viking:

[Mtb Jak]

thanks for the skid man! it was nice talking to you aswell!

btt

[tyspier]

want to ship the skid/hitch nutstrips to 19522?

[thatguy86]

i want the rustys brackets and hooks and hi-lift mount... pics to badbowtie1986@aol.com

[sidriptide]

want to ship the skid/hitch nutstrips to 19522?

you have a PM...

[sidriptide]

bump.. again...

[Bugboy]

Whats left?

[asp]

mike i'm an idiot. i want that 36" DS, as long as it will work with my SYE. i know it's the right length, but it's the joints on either end i'm concerned about... i should have noticed/thought of it when i was there.

when you say "with slip yokes," you mean slip yoke in the DS, not like the factory setup, right? just to clarify...

let me know when works for you. i would have sent a pm but i wanted to stake my claims.

[sidriptide]

Whats left?

tow hooks
front skid plate
hi-lift mount
rear hitch nut-strips
rear d/shafts

[sidriptide]

mike i'm an idiot. i want that 36" DS, as long as it will work with my SYE. i know it's the right length, but it's the joints on either end i'm concerned about... i should have noticed/thought of it when i was there.

when you say "with slip yokes," you mean slip yoke in the DS, not like the factory setup, right? just to clarify...

let me know when works for you. i would have sent a pm but i wanted to stake my claims.


these are stock factory rear d/shafts... with the OEM type slip yoke. these wont work with an SYE...

i do have a spare front shaft that will probably work for you. i'll measure it tommorow.

[asp]

these are stock factory rear d/shafts... with the OEM type slip yoke. these wont work with an SYE...

i do have a spare front shaft that will probably work for you. i'll measure it tommorow.
i suppose that works. fwiw, i know for a fact i'm going to need in the ballpark of 35 to 36".

[Osmosisfrank]

Can you post a pic of the jack mount?

[camarors8992]

Yea sorry, just a little over a year late.

[Osmosisfrank]

Ha! I missed that...sorry. Guess I need to pay better attention! :wstupid: