needmocash
June 10th, 2008, 07:35
Parting out a 92 XJ
Everything is for sale but the axles, wheels, tires, and drive shafts.
Link for Photos
http://www2.snapfish.com/shareereg/p=57081212971759391/l=392998495/g=114468082/cobrandOid=1000361/otsc=SYE/otsi=SALB/pns/share/p=57081212971759391/l=392998495/g=114468082/cobrandOid=1000361/otsc=SYE/otsi=SALB
You may have to register to view them
Engine: 4.0 liter 100K miles runs excellent. Never had any trouble with it, runs strong. All accessories will be included. The AC has been converted to an air pump. New power steering pump.
$400
Tranny: AW4 100K miles. Operates perfectly does not need rebuilding.
$200
Transfer case: Terra Low NP231 with 4:1 low range and slip yoke eliminator. Great condition functions perfectly. ($1100 new for the kit which you have to install)
$750
Rustys 6 lift with 2 econo. Recently had the rear spring swapped out due to sagging and the new springs have been great. The lift is springs only since I have a custom long arm up front.
$250
The front long arm link are 1.5 .250 wall DOM tubing using chrome molly Ύ by Ύ hiem joints that are fully adjustable. If you buy them they will require custom mounts on the axle and the frame.
$180
Rear axle has a custom traction bar and skid plate for the transfer case to mount it.
$150 complete
All of the seats are a little dirty but are in good shape with no rips or tears. I will clean them up before sale.
Front seats $40 each
Rear seat assembly $50
Center console is in good shape. $25
Gas tank has been moved up and is still in good condition with the stock fuel pump. $25
Exocage is custom built with custom bumpers to mount it. The bumpers both have receivers. The front bumper has a custom winch mount that is removable and the bumper is also a sealed air tank with fittings .
Internal cage is two pieces so it can be removed and installed easily with slip fittings and is 6 point mounting.
There are also custom rock sliders that weld to the frame and tie in the internal cage with removable mounts. $60 for pair
Exocage: $80 has a lot of scratches on it. .095 wall 1.5 tubing
Interal Cage: $100 .095 wall 1.5 tubing in great shape
Bumpers: $180 for the pair. Font alone $100. Very strong bumpers
The body is in pretty bad shape as you can see from the pictures. The font doors are modified to be removable and are less beat up than the rest. All the windows and controls function. Windshield and rear window have no cracks. The rear deck is damaged but functions fine. The hood is in decent shape.
Make offers on those.
If you want to buy the body engine and tranny, exocage etc complete we can work something out but it will not have axles so moving it will be difficult. This will include the long arm front and all the mounts on the frame and springs. The rear springs have been moved back and the front axle is pushed forward to make the wheelbase 110
Lots of good parts here if you have any questions call Josh @ (912) 667-2970 or burf11@hotmail.com (burf11@hotmail.com)
Located in Savannah GA 31419. I can ship some of this stuff but I prefer pick up.
Everything is for sale but the axles, wheels, tires, and drive shafts.
Link for Photos
http://www2.snapfish.com/shareereg/p=57081212971759391/l=392998495/g=114468082/cobrandOid=1000361/otsc=SYE/otsi=SALB/pns/share/p=57081212971759391/l=392998495/g=114468082/cobrandOid=1000361/otsc=SYE/otsi=SALB
You may have to register to view them
Engine: 4.0 liter 100K miles runs excellent. Never had any trouble with it, runs strong. All accessories will be included. The AC has been converted to an air pump. New power steering pump.
$400
Tranny: AW4 100K miles. Operates perfectly does not need rebuilding.
$200
Transfer case: Terra Low NP231 with 4:1 low range and slip yoke eliminator. Great condition functions perfectly. ($1100 new for the kit which you have to install)
$750
Rustys 6 lift with 2 econo. Recently had the rear spring swapped out due to sagging and the new springs have been great. The lift is springs only since I have a custom long arm up front.
$250
The front long arm link are 1.5 .250 wall DOM tubing using chrome molly Ύ by Ύ hiem joints that are fully adjustable. If you buy them they will require custom mounts on the axle and the frame.
$180
Rear axle has a custom traction bar and skid plate for the transfer case to mount it.
$150 complete
All of the seats are a little dirty but are in good shape with no rips or tears. I will clean them up before sale.
Front seats $40 each
Rear seat assembly $50
Center console is in good shape. $25
Gas tank has been moved up and is still in good condition with the stock fuel pump. $25
Exocage is custom built with custom bumpers to mount it. The bumpers both have receivers. The front bumper has a custom winch mount that is removable and the bumper is also a sealed air tank with fittings .
Internal cage is two pieces so it can be removed and installed easily with slip fittings and is 6 point mounting.
There are also custom rock sliders that weld to the frame and tie in the internal cage with removable mounts. $60 for pair
Exocage: $80 has a lot of scratches on it. .095 wall 1.5 tubing
Interal Cage: $100 .095 wall 1.5 tubing in great shape
Bumpers: $180 for the pair. Font alone $100. Very strong bumpers
The body is in pretty bad shape as you can see from the pictures. The font doors are modified to be removable and are less beat up than the rest. All the windows and controls function. Windshield and rear window have no cracks. The rear deck is damaged but functions fine. The hood is in decent shape.
Make offers on those.
If you want to buy the body engine and tranny, exocage etc complete we can work something out but it will not have axles so moving it will be difficult. This will include the long arm front and all the mounts on the frame and springs. The rear springs have been moved back and the front axle is pushed forward to make the wheelbase 110
Lots of good parts here if you have any questions call Josh @ (912) 667-2970 or burf11@hotmail.com (burf11@hotmail.com)
Located in Savannah GA 31419. I can ship some of this stuff but I prefer pick up.