• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

What year crankshafts fit what years

jk333

NAXJA Forum User
Location
WA
One of the members on here has a 94 crankshaft and my rig is an 87. is this gonna jive or is it one of those Renix differs from HO things. :helpme:
 
hot_rod_hooligans said:
Get a crank for a 4.2L, you're engine will magically gain .5 litres.
no really, does it matter about the year difference? i know about the stroker. i just need t oget my rig up and going again. Im on a paper thin budget.
 
GSequoia said:
Everything but the flywheel / flexplate will all work.

Sequoia - 1996 Block with a 1989 Top End ;)
your kidding, i would have to changethe flywheel, :smsoap:
 
jk333 said:
your kidding, i would have to changethe flywheel, :smsoap:

Yes, you will have to change it. The ring for the Crank Position Sensor is very different in the Renix vs. the HO. But with the engine out (which it has to be to swap it!) it's an easy job, just six bolts.
 
Back
Top