t-case linkage problems

ok this linkage is really pissin me off.
I originally thought the linkage was at a bad angle because of a fubared crossmember so I replaced the crossmember, replaced the bushings and adjusted the linkage. out of curiosity I crawled under the jeep tonite and sure enough
the damn linkage has popped out of the bushing again
WTH
the bellcrank bushing pops out of the bracket attached to the side of the transmission.

please SOMEONE give me an idea why this is happening
its driving me crazy :flamemad:

T-case drop or bad tranny mount.

dont have a drop so I guess I will check out the tranny mount. thanks