PDA

View Full Version : it broke

GATMOG
August 26th, 2006, 18:06
:shiver:

ok, i turn the key, i the starter turns, but no starty!!! CEL and GEN lights are on, and the electrical fan starts spinning soon as the electricity comes on--any ideas??
MogifiedXJ
August 26th, 2006, 18:07
:shiver:

ok, i turn the key, i the starter turns, but no starty!!! CEL and GEN lights are on, and the electrical fan starts spinning soon as the electricity comes on--any ideas??
cps maybe???
langer1
August 26th, 2006, 18:22
:shiver:

ok, i turn the key, i the starter turns, but no starty!!! CEL and GEN lights are on, and the electrical fan starts spinning soon as the electricity comes on--any ideas??

What year?
GATMOG
August 26th, 2006, 18:33
its a 96 with ax15
HogWash
August 26th, 2006, 21:23
Nuetral Saftey Switch any good????,I had the same problem.Mess with your shifter and hold key in on possition and if it starts like that then"time to get dirty"
otto
August 26th, 2006, 21:28
NSS on an AX-15?

Have you looked at the CEL to see what codes it's throwing?
sams88
August 26th, 2006, 23:08
The CPS most likely, it controls the fire to the plugs, and all sorts of little things that have to be there to run. If the starter is turning you can rule out the tranny interlock.
GATMOG
August 26th, 2006, 23:33
ill get an obii reader and see whats up...sigh...i wish i was tech saavy
GATMOG
August 27th, 2006, 18:13
fixed!! thank guys for the advice--it was frying a 30amp maxi fuse connected to the fuel pump relay..
advise for people who have switches on their fuel pumps: keep those wires away from seat sliding brackets!! i was asking for a short..
GATMOG
August 27th, 2006, 18:14
fixed!! thank guys for the advice--it was frying a 30amp maxi fuse connected to the fuel pump relay..
advice for people who have switches on their fuel pumps: keep those wires away from seat sliding brackets!! i was asking for a short..