• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

How to get rid of upper axle mount bushings?

bcmaxx

NAXJA Forum User
How can I get rid of the upper control arm press in bushings? I'd rather have a solid mount or is this not such a good idea?
 
1)use a torch and cut the mount off the houseing and on the tube.
2)build a truss with tabs on it
3)buy DOM tubing and heims
4) make custom Long arms
5)have fun


thats what i did kinda
 
Call up rockkrawler, they have bushings that come in their long arm kit but they don't advertise that are similar to what you want. They are basically a sperical ball like a johny joint with a polyurethane spacer on each side sandwiched by 2 metal plates that bolt everything together tight.

518-270-9822 RockKrawler's #
 
Back
Top