Changing oil pan and seals

I looking for some help in the form of good instructions about how to drop the oilpan and change the pan and bearing seals. Pictures would be nice if there is a writeup. I tried to search, but the search didnt seem to be working. I typed in the word "oil" and it said there was nothing found.....hard to believe.

three letter search does not work... try rear main seal

just went through that ( stock suspension): jacked car on front frame members to let the axle droop all the way. removed starter and disconnected drag link from pitman. undo all bolts, remove pan. remove rear main bearing cap and use small drift and hammer to start seal coming out. replace seal. use silicone to seal edges of rear main and edges of timing cover pan seal interface. replace gasket and pan, torque to specs