• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

arb compressors? which one?

CV95XJ

NAXJA Forum User
Location
Hinckley, IL
Ive been looking at compressors to power 2 arb lockers and possibly inflate a tire occasionally. these are the 2 I am looking at.

http://cgi.ebay.com/ebaymotors/ARB-...010QQitemZ200062659631QQrdZ1QQsspagenameZWD1V


and. . . .

http://cgi.ebay.com/ebaymotors/ARB-...010QQitemZ200062661184QQrdZ1QQsspagenameZWD1V

i know the first one has a built in tank, and the second does not, I was wondering if I got the cheaper one, and routed my own tank if it would work just as well. Also in these kits do they include all the lines to connect 2 arb's or just one. I just see the one switch so Im assuming one. Also, any tips on the install.
 
I cannot comment about the 2 compressors you listed above but
I have the one listed below, It works to supply the lockers & ok as a comp to pump up my tires. I am happy with it.
http://cgi.ebay.com/ebaymotors/ARB-Air-Compressor-Part-CKMA12_W0QQitemZ230218347350QQcmdZViewItem?hash=item230218347350&_trksid=p3286.m20.l1116
It only included the wiring harness & 1 switch to turn it on,
The locker activation switches, solenoids & air lines come with the Locker itself. The good news is that the Harness has all the connections for 2 lockers.
 
CV95XJ said:
Ive been looking at compressors to power 2 arb lockers and possibly inflate a tire occasionally. these are the 2 I am looking at.

http://cgi.ebay.com/ebaymotors/ARB-Air-Compressor-RDCKA-for-Air-lockers_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ46104QQihZ010QQitemZ200062659631QQrdZ1QQsspagenameZWD1V


and. . . .

http://cgi.ebay.com/ebaymotors/ARB-Air-Compressor-CKSA12-for-Air-lockers_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ46104QQihZ010QQitemZ200062661184QQrdZ1QQsspagenameZWD1V

i know the first one has a built in tank, and the second does not, I was wondering if I got the cheaper one, and routed my own tank if it would work just as well. Also in these kits do they include all the lines to connect 2 arb's or just one. I just see the one switch so Im assuming one. Also, any tips on the install.

the second one you listed is only a 10% duty cycle or something like that. meaning for every whole minute it runs, it needs 9 minutes to cool off. it is only meant to run lockers, NOT inflate tires. the second one does have a little tank above the motor, but like I said, only enough to run a locker or 2.
 
Back
Top