Jome Made quick discos

[wingnutooa]

http://img134.imageshack.us/img134/250/quickdiscos1ob8.jpg (http://imageshack.us)

http://img134.imageshack.us/img134/2127/quickdiscos2lc8.jpg (http://imageshack.us)

and one of my jeep with the new flares and stickers on the rear quarter/hatch

(remaining stickers will be picked up today and on tonight or tomorrow!)

http://img134.imageshack.us/img134/7023/jeepstickersxy2.jpg (http://imageshack.us)

[GlueNTape]

Looks good. is that a tie rod end on the bottom?

[mud1059]

Who is Jome?

[scottmcneal]

O jew know, jome

[DrSockMonkey]

looks very clean, what's the parts list? and are they noisey?

[TORX]

and one of my jeep with the new flares and stickers on the rear quarter/hatch

(remaining stickers will be picked up today and on tonight or tomorrow!)
Paging Mojojojo.... You have some competition on the sticker aisle. ;)

[RlCHARD CRANlUM]

looks very clean, what's the parts list? and are they noisey?

Ditto on the parts list. I think my jeep is too noisy to tell if they'd be noisy on it.

[wingnutooa]

long 1/2 inch bold : cut head off and double nut it to the axle, drill hole for pin.

4 1/2 heim's, mine happend to be fine thread.

i'll check the peice of tubing for the dimensions but a 1/2 bolt fits snugly inside.

4 1/2 bolts, same pitch as heim's: cut heads off and weld them into the tubing.

top consists of a peice of 1x2 tubing scrap. cut off one of the 1" sides and cut into a shape suitable for the top of your link.

drill 1/2 inch hole in both sides and a 3/8 hole in the top. (can use bigger bolt...i probably should have)

weld a 3/8 (optional) into the matching hole on the 1x2 (creating a stud)

3/8's needs to be long enough to get through the sway bar and still have enough room for washers and a nut.

and of course whatever 1/2 bolt you need for the upper heim through the 1x2.


powder coating is optional of course. but i chose blue.

took about 45 min to powder coat them with eastwood's hot coat system.

(including prep)

i think i have about 1.5 hours in them total.

i will be cutting them down (or making new ones) as they are slightly too long for a 5.5 inch lift.

and jam nuts for the heim's are also on the to do list.


any other questions please post up.

[wingnutooa]

no they're not noisy as far as i can tell.

i would like to take up some of the side to side slop with an old shock bushing or something though.

(too long of a pin bolt)

i'm also going to be welding a long stud to the jeep so i can just swing the link up and pin it instead of rigging up a bungee and zip ties.

[DrSockMonkey]

i will be cutting them down (or making new ones) as they are slightly too long for a 5.5 inch lift..

Well if you make new ones how much you want for that pair?:D

[mojojojo]

Paging Mojojojo.... You have some competition on the sticker aisle. ;)

naaa, i added some more today. :D

M.C. Hammer said it best..........."Cant touch this" http://www.naxja.org/forum/images/icons/icon6.gif

[RedJeep2.0]

Well if you make new ones how much you want for that pair?:D

yeah how much for you to mak me some??
no paint.

[banderso]

I remember you telling me you had picked up the parts to do this when you tuned my antenna for me. Those look great. A lot homemade disco's tend to look cobbled together, but those look very professional. Nice job.

[wingnutooa]

i dont really know what they go for.

i think i have 50$ and some labor in this set.

if enough people express interest i might pick up some parts and make a few sets.