dana 44 bearing caps

i know i know, but i pulled the bearing caps and everything else off the 44 a few months ago, and thought id just remember the orientation of everything,and since that build got put on the back burner, the bearing caps got moved around, i know the orientation of one, up down, and the side. but the other im not sure if its set up or down correctly, ive searched all over for pics, if anyone has any they can post id be stoked cuz ive searched and searched...

Look closely at the caps and the gasket surface of the pumpkin. There should be some letter stamped there in 2 different orientations. For example the M would be on one side and a E (M rotated 90*) on the other. That is assumeing that they are the original caps to that axle...

My D30 has a J upright on the passenger side and sideways on the drivers side.

~Alex

Look at photos 4 & 5 of this detailed thread:

http://www.naxja.org/forum/showthread.php?t=90711

alex22 said:

My D30 has a J upright on the passenger side and sideways on the drivers side.

~Alex

Click to expand...

yupper:

there are stamped letters. I just did a ford front d44 and it had J's stamped in the caps as above