Comanche Devil
NAXJA Forum User
- Location
- Nova Scotia Canada
Just wondering how much longer "eye to eye" are the aftermarket 3" lift arms compared to the stock arm length?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Lower Arm Length
- Thread starter Comanche Devil
- Start date
goodburbon
NAXJA Forum User
- Location
- Westcliffe Colorado.
What brand? I think most are stock length, but incorporate a bend to clear the axle end LCA bracket.
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Alot are a 1/4" longer.
Comanche Devil
NAXJA Forum User
- Location
- Nova Scotia Canada
goodburbon said:
Dont have any brand in mind. I just wondering what the diff was to correct caster angle.
Im thinging of doin a budgit 3" lift and was wondering what i can get away with doin and not doin.
WheelinJR
NAXJA Forum User
- Location
- Portland, Oregon
The ones with our 3" lift run 5/16" longer IIRC, and incorporate a bend.
Boostwerks.com
NAXJA Forum User
- Location
- Colorado
I'd honestly think about getting those new RC drop brackets, and simply replacing the bushings in your factory arms. It'll ride a lot better, and flex with the best of them.
Yucca-Man
NAXJA Member # 683
- Location
- Castle Rock, CO
http://yuccaman.com/jeep/re_db.html#arms
For a 3" lift you should need about a 0.25" longer than stock at 16" vice 15.75"
Jim www.yuccaman.com
For a 3" lift you should need about a 0.25" longer than stock at 16" vice 15.75"
Jim www.yuccaman.com