PDA

View Full Version : 2 door xj parts needed


xjhal
February 11th, 2008, 07:53
pass side door,a little rust is ok

both front vent windows with working locks

rear side sliding windows(like cheif or pioneer ones)

cash waiting or can even trade some good xj trannys ive got.let me know

MoparManiac
February 11th, 2008, 08:14
I have the front vent windows off a limited 4-dr (should be the same, I was going to pop them in my 2-dr.

Have a pass side door that probably isn't worth your time though. (bondo'd and door skin is starting to seperate at the bottom).

xjhal
February 11th, 2008, 08:56
actually just figured out i only need the door hinge,not the whole door.so thats good.where are theese located?

MoparManiac
February 11th, 2008, 09:07
Well I cut the bottom of the hinge off to make it removable but it still works fine. I wasn't sure what you needed the whole door for so I just threw it out there.

Look at my location. Southern part of MA. Not sure how long of a drive it would be from you, but 02072 is where they're at.

I can check the condition of the vent windows for the front doors tonight. I haven't checked the locks in a while but I know when I pulled them they worked well.

xjhal
February 11th, 2008, 09:14
ok let me know.ill look up the distance too.

CheapXJ
February 11th, 2008, 17:02
I've got a whole 2-door roof/side section along w/ a pair of doors I'm not using.

I'd trade ALL that for a good 91-95 AW4.

how far off 95 are you?

that'll give you all the glass pieces, some spare doors (doors are complete minus speakers and the door panels are a little fukt up)

the roof section has the rear pop-out vent windows (they never made a slider on the XJ) and is complete minus the hatch and interior plastic. it has the rear soundbar in it also.

I'm tentatively planning on going to wrights on the 23rd, and if you're not too far from 95 (or willing to meet me along 95 somewhere) I could deliver them also.

heres a pic:
http://i74.photobucket.com/albums/i273/Timmay822/MJ%20cutting/IMG_1949Medium.jpg

xjhal
February 11th, 2008, 18:03
pm sent