XJ Stuff for Sale Soon

[iBarsky]

In the next couple of weeks I'm going to be parting out a '96 4door Auto with NP231. Going to have bits and pieces, just depends on what the guy who is buying the body wants to keep. I know that I'll have the following
1. 2 front driveshafts(1 needs rebuilt)
2. 2 sets of d30shafts-1set from the '96 and 1 set from a '97TJ D30 I was told that they have the bigger ujoints, but i haven't compared them to the XJ ones to make sure.
3.Detriot Trutrac with 3.73s for a LowPinion D30. Is currently in a TJD30.
4.Factory receiver hitch
5.i've got a HP D30 with 3.55s that needs shafts and a driver side knuckle.

I'll have other stuff too probably If you need something. The guy who wants the body doesn't need any of the suspension or running gear. At this point he wants the doors and windows intact.The motor is shot and the NP231 needs rebuilt. PM me if you want something and I'll try to get back to you quickly, however the next week is going to be hectic so bare with me.

[iBarsky]

Almost forgot: I'm in North Georgia and at this point I'm not shipping anything. I have no set prices so just make a reasonable offer if you want something.

[ZacSquatch]

May grab the tranny from ya.. I'm in Cullowhee, just up 74/23 from you I reckon.. maybe the front DS needing rebuilding depending on price

[iBarsky]

I won't start pulling until at least Thursday and then it will be as time allows. Just PM an offer, this stuff is not going to do me anygood sitting in the backyard and it won't fit the '78 K10 that I'm starting on.

[Jess]

In the next couple of weeks I'm going to be parting out a '96 4door Auto with NP231. Going to have bits and pieces, just depends on what the guy who is buying the body wants to keep. I know that I'll have the following
1. 2 front driveshafts(1 needs rebuilt)
2. 2 sets of d30shafts-1set from the '96 and 1 set from a '97TJ D30 I was told that they have the bigger ujoints, but i haven't compared them to the XJ ones to make sure.
3.Detriot Trutrac with 3.73s for a LowPinion D30. Is currently in a TJD30.
4.Factory receiver hitch
5.i've got a HP D30 with 3.55s that needs shafts and a driver side knuckle.

I'll have other stuff too probably If you need something. The guy who wants the body doesn't need any of the suspension or running gear. At this point he wants the doors and windows intact.The motor is shot and the NP231 needs rebuilt. PM me if you want something and I'll try to get back to you quickly, however the next week is going to be hectic so bare with me.

the shafts from the 96 XJ and the TJ shafts should both have 297 joints.

[MELKORsXJ]

i'll take the receiver hitch for $50 with mounting hardware... i'm in chattanooga, how far of a drive are you?

[iBarsky]

Receiver is yours. I'm about an hour or less south of you. I work in Lafayette, but I'm ususally in Chattanooga a couple of times a month( was there yesterday in fact) so as soon as I get it off I'll let you know and we can set something up. PM me someway to contact you when I get it off or I'll post here if thats better for you.

[ZacSquatch]

You hike the AT?

[iBarsky]

Its on the list but the closest I've made it is a trail out of Elijay that headed that way. We have a lot of local stuff plus Sipsey in Alabama and few places in Tn like Fall Creek Falls, etc. My wife is just gettin into doing longer trails and my daughter is getting there. I'm hoping to hit some of the AT maybe by fall. I'll have to do it in sections, but I'd love to do the whole thing, just don't have the $$$ of the 5+months it takes.

[ZacSquatch]

Ever read "A walk in the Woods" Bill Bryson

[iBarsky]

No. Good reading?

[ZacSquatch]

Very funny accounts on the trail

[fast64]

How much for a set of d30 shafts? Whichever set is cheaper...I just want trail spares

[iBarsky]

I'll have to check that out Zach. Sent you a PM fast64.

[BruceB83]

Interested in the D30 shafts...PM sent.

[Stallacrew]

I need a couple things.....
Transfer Case.....need it
Seats....if they are in good condition and are black or grey......need em
Steering column... as long as there is no "wobble" like mine has then I def need it
If the tires are good, I would think about it.
I would really like the head/intake/exhaust/injectors too.

PM me and let me know what you want for these...Keep in mind I am a POOR college student and the drive there is gonna be costly too from Tuscaloosa Alabama.

Thanks so much--Alex

[MELKORsXJ]

i might be interested in the in the front driveshafts and the rear leafsprings, if they're available. ..say double what my current 'tab' is at?

[iBarsky]

PMed you Melkor. Stallacrew the TC needs rebuilt and the rest aren't for sale. And poor husband and father outranks poor college student everytime.

[iBarsky]

Update: the receiver and front DSs are spoken for.

[chopperdonk]

i want a set of the 30 shafts

[Stallacrew]

PMed you Melkor. Stallacrew the TC needs rebuilt and the rest aren't for sale. And poor husband and father outranks poor college student everytime.

Indeed it does....Nevermind on the TC, thanks though. Hope you find a buyer. I appreciate it.
--Alex

[z_lindig]

i would be interested in the head pipe off the motor if it's in good condition. i'm located in cumming...