PDA

View Full Version : Your thoughts...

JEONLYEP
January 26th, 2008, 13:50
I was going to say a penny for your thoughts.

But I didn't want to have to cut a bunch of $0.01 checks.....



http://i60.photobucket.com/albums/h8/Jeonlyep/620fab/509a57cc.jpg


DAryl
WB9YZU
January 26th, 2008, 14:12
I was going to say a penny for your thoughts.

But I didn't want to have to cut a bunch of $0.01 checks.....



http://i60.photobucket.com/albums/h8/Jeonlyep/620fab/509a57cc.jpg


DAryl

Latch?
JEONLYEP
January 26th, 2008, 14:14
Latch?
Coming soon...
JEONLYEP
January 26th, 2008, 14:15
I was going to say a penny for your thoughts.

But I didn't want to have to cut a bunch of $0.01 checks.....
I guess I could do that as soon as I start getting all the $0.02 checks that I've been promised.....
JEONLYEP
January 26th, 2008, 14:27
http://i60.photobucket.com/albums/h8/Jeonlyep/620fab/c82726e6.jpg

http://i60.photobucket.com/albums/h8/Jeonlyep/620fab/d825bb3e.jpg

How that for soon?
YELLAHEEP
January 26th, 2008, 17:22
Nice job Daryl! I like 'em!

....... but what did ya do with those uber-cool half doors you had before?
JEONLYEP
January 26th, 2008, 20:59
Nice job Daryl! I like 'em!

....... but what did ya do with those uber-cool half doors you had before?
Oh, these aren't mine, I'm building them for someone else..... I still have the half doors....


A few video clips of the CJ4x4 (Cimarron Jeep and 4x4) club wheelin' (http://vids.myspace.com/index.cfm?fuseaction=vids.showvids&friendID=115973144&n=115973144&MyToken=835c1f96-3b43-4918-bfb1-a401a5f44cc5)
Yucca-Man
January 31st, 2008, 03:45
http://i60.photobucket.com/albums/h8/Jeonlyep/620fab/d825bb3e.jpg
OOOOoooooOOOOOoooohhh!!! LOCKABLE half-doors!! :laugh3:

Jim www.yuccaman.com
jdogg4
January 31st, 2008, 07:37
I think you need new seat covers really those are nasty. HAHAHA

I'd like to fab up some soft doors or tube doors down the road myself.

What about using flat bar stock instead of angle on the front part of them. Might give it a nicer cleaner look.
Thats the idea I was looking at going with. like a 3/8 bar by what ever wide to weld that pipe around then put the hinge setup on that? Just an idea.
JEONLYEP
January 31st, 2008, 22:08
I think you need new seat covers really those are nasty. HAHAHAWhat, you don't like my bath mats? They are rubberized on the back side so that if the seats get wet you just turn them over and it won't soak your ass.
What about using flat bar stock instead of angle on the front part of them. Might give it a nicer cleaner look.
Thats the idea I was looking at going with. like a 3/8 bar by what ever wide to weld that pipe around then put the hinge setup on that? Just an idea.
The reason I went with angle is that gives a nice area to mount the mirror to.
jdogg4
February 1st, 2008, 06:36
What, you don't like my bath mats? They are rubberized on the back side so that if the seats get wet you just turn them over and it won't soak your ass.
They are? hahahah Thats funny right there. I would have never thought about that. Good idea really

The reason I went with angle is that gives a nice area to mount the mirror to.
Ok didn't know you were going with a mirror setup on that aswell.
Did you bend the tubing yourself?
JEONLYEP
February 1st, 2008, 15:21
They are? hahahah Thats funny right there. I would have never thought about that. Good idea reallyI've keep my butt dry with them a couple of times. Once I even took it off the seat, and laid it on my lap with the rubber side out to help stay dry while on the trail in a sudden rain storm.

Ok didn't know you were going with a mirror setup on that aswell.
Did you bend the tubing yourself?I just got my bender and the real reason for making the doors was to get used to the bender and the Bend tech software (http://www.2020softwaresolutions.com/prod04.htm).